Jump to content

Overclocking issue

Zolfe
By Zolfe
in Troubleshooting
 Share
Posted

So I recently built my first high end PC and I am trying to of my ryzen 1800x but when i oc it when I run cinebench or something it turns off because of overheating but I have a Kraken x62 and 5 fans 4 on the road and 1 in the back.

 

Atleast I think overheating is the issue because monitoring it it jumps up to 97c when 100% then shuts off

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/
Share on other sites
Link to post
Share on other sites
Posted

reseat the Kraken and try again

Remember kids, the only difference between screwing around and science is writing it down. - Adam Savage

 

PHOΞNIX Ryzen 5 1600 @ 3.75GHz | Corsair LPX 16Gb DDR4 @ 2933 | MSI B350 Tomahawk | Sapphire RX 480 Nitro+ 8Gb | Intel 535 120Gb | Western Digital WD5000AAKS x2 | Cooler Master HAF XB Evo | Corsair H80 + Corsair SP120 | Cooler Master 120mm AF | Corsair SP120 | Icy Box IB-172SK-B | OCZ CX500W | Acer GF246 24" + AOC <some model> 21.5" | Steelseries Apex 350 | Steelseries Diablo 3 | Steelseries Syberia RAW Prism | Corsair HS-1 | Akai AM-A1

D.VA coming soon™ xoxo

Sapphire Acer Aspire 1410 Celeron 743 | 3Gb DDR2-667 | 120Gb HDD | Windows 10 Home x32

Vault Tec Celeron 420 | 2Gb DDR2-667 | Storage pending | Open Media Vault

gh0st Asus K50IJ T3100 | 2Gb DDR2-667 | 40Gb HDD | Ubuntu 17.04

Diskord Apple MacBook A1181 Mid-2007 Core2Duo T7400 @2.16GHz | 4Gb DDR2-667 | 120Gb HDD | Windows 10 Pro x32

Firebird//Phoeniix FX-4320 | Gigabyte 990X-Gaming SLI | Asus GTS 450 | 16Gb DDR3-1600 | 2x Intel 535 250Gb | 4x 10Tb Western Digital Red | 600W Segotep custom refurb unit | Windows 10 Pro x64 // offisite backup and dad's PC

 

Saint Olms Apple iPhone 6 16Gb Gold

Archon Microsoft Lumia 640 LTE

Gulliver Nokia Lumia 1320

Werkfern Nokia Lumia 520

Hydromancer Acer Liquid Z220

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231816
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, revsilverspine said:

reseat the Kraken and try again

I have and I changed the stock thermal paste I don't understand because running a stress test now and it is on 74c but cinebench gets it to 95c

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231821
Share on other sites
Link to post
Share on other sites
Posted
Just now, Zolfe said:

I have and I changed the stock thermal paste I don't understand because running a stress test now and it is on 74c but cinebench gets it to 95c

Hm, are you sure the pump is actually working and it isn't DOA?

Remember kids, the only difference between screwing around and science is writing it down. - Adam Savage

 

PHOΞNIX Ryzen 5 1600 @ 3.75GHz | Corsair LPX 16Gb DDR4 @ 2933 | MSI B350 Tomahawk | Sapphire RX 480 Nitro+ 8Gb | Intel 535 120Gb | Western Digital WD5000AAKS x2 | Cooler Master HAF XB Evo | Corsair H80 + Corsair SP120 | Cooler Master 120mm AF | Corsair SP120 | Icy Box IB-172SK-B | OCZ CX500W | Acer GF246 24" + AOC <some model> 21.5" | Steelseries Apex 350 | Steelseries Diablo 3 | Steelseries Syberia RAW Prism | Corsair HS-1 | Akai AM-A1

D.VA coming soon™ xoxo

Sapphire Acer Aspire 1410 Celeron 743 | 3Gb DDR2-667 | 120Gb HDD | Windows 10 Home x32

Vault Tec Celeron 420 | 2Gb DDR2-667 | Storage pending | Open Media Vault

gh0st Asus K50IJ T3100 | 2Gb DDR2-667 | 40Gb HDD | Ubuntu 17.04

Diskord Apple MacBook A1181 Mid-2007 Core2Duo T7400 @2.16GHz | 4Gb DDR2-667 | 120Gb HDD | Windows 10 Pro x32

Firebird//Phoeniix FX-4320 | Gigabyte 990X-Gaming SLI | Asus GTS 450 | 16Gb DDR3-1600 | 2x Intel 535 250Gb | 4x 10Tb Western Digital Red | 600W Segotep custom refurb unit | Windows 10 Pro x64 // offisite backup and dad's PC

 

Saint Olms Apple iPhone 6 16Gb Gold

Archon Microsoft Lumia 640 LTE

Gulliver Nokia Lumia 1320

Werkfern Nokia Lumia 520

Hydromancer Acer Liquid Z220

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231827
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, revsilverspine said:

Hm, are you sure the pump is actually working and it isn't DOA?

How would I check? And it isn't much but when I try to move the actual cooler it moves bit i have to apply.some pressure

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231832
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Zolfe said:

How would I check? And it isn't much but when I try to move the actual cooler it moves bit i have to apply.some pressure

It's more of a touch and feel (and hear) situation when trying to figure out if the pump works. If you touch it and feel it spinning, it might be spinning. Also, in some AIOs you can kinda "feel" the water flowing through the tubes.

I'm not very familiar with the x62, so I couldn't tell you exactly how to check

Remember kids, the only difference between screwing around and science is writing it down. - Adam Savage

 

PHOΞNIX Ryzen 5 1600 @ 3.75GHz | Corsair LPX 16Gb DDR4 @ 2933 | MSI B350 Tomahawk | Sapphire RX 480 Nitro+ 8Gb | Intel 535 120Gb | Western Digital WD5000AAKS x2 | Cooler Master HAF XB Evo | Corsair H80 + Corsair SP120 | Cooler Master 120mm AF | Corsair SP120 | Icy Box IB-172SK-B | OCZ CX500W | Acer GF246 24" + AOC <some model> 21.5" | Steelseries Apex 350 | Steelseries Diablo 3 | Steelseries Syberia RAW Prism | Corsair HS-1 | Akai AM-A1

D.VA coming soon™ xoxo

Sapphire Acer Aspire 1410 Celeron 743 | 3Gb DDR2-667 | 120Gb HDD | Windows 10 Home x32

Vault Tec Celeron 420 | 2Gb DDR2-667 | Storage pending | Open Media Vault

gh0st Asus K50IJ T3100 | 2Gb DDR2-667 | 40Gb HDD | Ubuntu 17.04

Diskord Apple MacBook A1181 Mid-2007 Core2Duo T7400 @2.16GHz | 4Gb DDR2-667 | 120Gb HDD | Windows 10 Pro x32

Firebird//Phoeniix FX-4320 | Gigabyte 990X-Gaming SLI | Asus GTS 450 | 16Gb DDR3-1600 | 2x Intel 535 250Gb | 4x 10Tb Western Digital Red | 600W Segotep custom refurb unit | Windows 10 Pro x64 // offisite backup and dad's PC

 

Saint Olms Apple iPhone 6 16Gb Gold

Archon Microsoft Lumia 640 LTE

Gulliver Nokia Lumia 1320

Werkfern Nokia Lumia 520

Hydromancer Acer Liquid Z220

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231838
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, revsilverspine said:

It's more of a touch and feel (and hear) situation when trying to figure out if the pump works. If you touch it and feel it spinning, it might be spinning. Also, in some AIOs you can kinda "feel" the water flowing through the tubes.

I'm not very familiar with the x62, so I couldn't tell you exactly how to check

 

8 minutes ago, Zolfe said:

How would I check? And it isn't much but when I try to move the actual cooler it moves bit i have to apply.some pressure

Cant you hear the pumps working?

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231848
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 minutes ago, CardinalHunter said:

 

Cant you hear the pumps working?

Pump is definitely working. Could it be I had too many volts going to the CPU? Because I turned them down just a little bit and I am going near the same temps but no shut off.

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231864
Share on other sites
Link to post
Share on other sites
Posted
Just now, Zolfe said:

Pump is definitely working. Could it be I had too many volts going to the CPU? Because I turned them down just a little bit and I am going near the same temps but no shut off.

What voltage were you running? 

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231868
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Bananasplit_00 said:

What voltage were you running? 

Nevermind that I just ran cinebench again and it turned off. Could it be RAM I heard ryzen doesnt like 4 sticks of ram. SHould I try taking it out and then try?

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231875
Share on other sites
Link to post
Share on other sites
Posted
Just now, Zolfe said:

Nevermind that I just ran cinebench again and it turned off. Could it be RAM I heard ryzen doesnt like 4 sticks of ram. SHould I try taking it out and then try?

I still want to know the voltage. You can definitely try removing two RAM sticks, could help but it won't help the temperature 

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231884
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Bananasplit_00 said:

I still want to know the voltage. You can definitely try removing two RAM sticks, could help but it won't help the temperature 

Was 1.35, I think.

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10231887
Share on other sites
Link to post
Share on other sites
Posted
52 minutes ago, Zolfe said:

Was 1.35, I think.

That should be just fine. What overclock were you pushing? At that voltage I wouldn't expect 4GHz to be fine to be honest 

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10232040
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 hour ago, Bananasplit_00 said:

That should be just fine. What overclock were you pushing? At that voltage I wouldn't expect 4GHz to be fine to be honest 

3.7 I had a stable 3.9 yesterday but went to push to 4.0 and it wasnt stable so went back down to 3.9 and then just shut off when I did cinebench same with 3.8 and 3.7. Ill probably try and reseat the cooler again I guess

PC Build

Ryzen 1800x

Asus Strix 1080ti

G-Skill Trident z RGB 32gb 3200mhz

Gigabyte K7 motherboard

NZXT Kraken x62

EVGA Supernova P2 850w

Phanteks Enthoo Evolv ATX TG

SAMSUNG 960 EVO M.2 1tb

Seagate Barracuda 3tb

Gigabyte WiFi and Bluetooth Card

x3 NZXT Aer RGB Fans

NZXT Hue

 

Link to comment
https://linustechtips.com/topic/815737-overclocking-issue/#findComment-10232209
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×