Jump to content

Hyper-v 2016 and non-ecc ram

Go to solution Solved by Blake,
On 8/1/2017 at 2:52 AM, Windows 2000 said:

@TheComputerdude

Do you think is worth investing in ecc ram? These servers are my home server. I virtualize with them just for my fun.

 

ECC v non-ECC is down to:

 

Will you or your organisation loose more dollars then the cost of needing to reboot the server?

 

ECC = $$

non-ECC = $

downtime = x

if x >= $$ - $ then get ECC if not then don't.

 

Oversimplified (i.e. cloud/HA/DR/industry specific requirements/ etc not considered), but there you go. Home servers wont care about ECC.

Hi,

 

I am upgrading my server to Windows Server 2016 from Windows Server 2008 R2, but because I run my server on consumer chip I need to know if I can continue to use non-ecc ram with Hyper-V. Just for info, these server are not mission critical. I just want to know if I can use Hyper-V without ecc ram.

 

Thank you

Link to comment
https://linustechtips.com/topic/815374-hyper-v-2016-and-non-ecc-ram/
Share on other sites

Link to post
Share on other sites

Just now, Windows 2000 said:

Hi,

 

I am upgrading my server to Windows Server 2016 from Windows Server 2008 R2, but because I run my server on consumer chip I need to know if I can continue to use non-ecc ram with Hyper-V. Just for info, these server are not mission critical. Ijust to know if I can use Hyper-V without ecc ram.

 

Thank you

While I believe this is technically possible it is a bad idea you should be able to do it though

Link to post
Share on other sites

Just now, Windows 2000 said:

@TheComputerdude

Do you think is worth investing in ecc ram? These servers are my home server. I virtualize with them just for my fun.

 

probably not if it means investing in a whole new platform but if your platform is ecc compatible it may be worth it depending on which ddr iteration your platform supports and what you do but probably not.

Link to post
Share on other sites

ECC is not necessary, you should be more concerned about the performance and reliability of components and software.  If you were using a vm for a super important SQL Server dbms and database, yeah I would use ECC.  

 

If a stick of ram fails it would be cheaper to just replace it than invest in ECC ram considering the likelyhood of it actually dying.  

Link to post
Share on other sites

If you want to consider ECC, then both your motherboard and CPU have to be compatible.

But I was running non-ECC VM's for about 5 years 24/7/365 in 2008r2 hyper-v and no issues with them.

Spoiler

Desktop: Ryzen9 5950X | ASUS ROG Crosshair VIII Hero (Wifi) | EVGA RTX 3080Ti FTW3 | 32GB (2x16GB) Corsair Dominator Platinum RGB Pro 3600Mhz | EKWB EK-AIO 360D-RGB | EKWB EK-Vardar RGB Fans | 1TB Samsung 980 Pro, 4TB Samsung 980 Pro | Corsair 5000D Airflow | Corsair HX850 Platinum PSU | Asus ROG 42" OLED PG42UQ + LG 32" 32GK850G Monitor | Roccat Vulcan TKL Pro Keyboard | Logitech G Pro X Superlight  | MicroLab Solo 7C Speakers | Audio-Technica ATH-M50xBT2 LE Headphones | TC-Helicon GoXLR | Audio-Technica AT2035 | LTT Desk Mat | XBOX-X Controller | Windows 11 Pro

 

Spoiler

Server: Fractal Design Define R6 | Ryzen 3950x | ASRock X570 Taichi | Asus RTX 4060 Dual OC | 64GB (4x16GB) Corsair Vengeance LPX 3000Mhz | Corsair RM850v2 PSU | Fractal S36 Triple AIO + 4 Additional Venturi 120mm Fans | 8 x 20TB Seagate Exos X22 | 4 x 16TB Seagate Exos X18 | 3 x 2TB Samsung 970 Evo Plus NVMe | LSI 9211-8i HBA

 

Spoiler

NAS: Innovision 4U 24-bay chassis (12GB MiniHD SGIO Backplane) | Intel Core i9-10980xe | EVGA X299 FTW-K | EVGA RTX 2080Ti Super FTW3 | 128GB (8x16GB) Corsair Vengeance LPX 3200Mhz | DEEPCOOL PN1000M PSU| Noctua NH-D12L Chromax Black | 16 x 16TB Seagate Exos X18 | 2 x 2TB Samsung 990 Pro | 2 x 2TB Intel U.2 P4510 | LSI 9305-24i HBA

 

Link to post
Share on other sites

On 8/1/2017 at 2:52 AM, Windows 2000 said:

@TheComputerdude

Do you think is worth investing in ecc ram? These servers are my home server. I virtualize with them just for my fun.

 

ECC v non-ECC is down to:

 

Will you or your organisation loose more dollars then the cost of needing to reboot the server?

 

ECC = $$

non-ECC = $

downtime = x

if x >= $$ - $ then get ECC if not then don't.

 

Oversimplified (i.e. cloud/HA/DR/industry specific requirements/ etc not considered), but there you go. Home servers wont care about ECC.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×