msib350mmortar Need help in some cables

[Bqtacke222]

Hi guys.I am new to PC building and I have encountered some problems regarding where to put the wires.I dont understand the manual,hope someone can help me out here.Below is the picture of my motherboard and the wire that I have no clue putting it on.

Motherboard MSI B350M mortar

PSU:Masterwatt 600W

Case:CoolerMaster K350

Thanks

[107x]

case?

[Oshino Shinobu]

That connector goes on the top row on one of the USB headers on the motherboard. Line up the blanked off pin with the blanked pin on the board header. 

[Bqtacke222]

16 minutes ago, 107x said:

case?

CoolerMaster K350

[Bqtacke222]

12 minutes ago, Oshino Shinobu said:

That connector goes on the top row on one of the USB headers on the motherboard. Line up the blanked off pin with the blanked pin on the board header. 

Is it the top row of the 1st picture and the last four pins on the right side that i connect it to?Thanks

[Oshino Shinobu]

3 minutes ago, Bqtacke222 said:

Is it the top row of the 1st picture and the last four pins that i connect it to?Thanks

It will be a header like this, they will have something like "JUSB" next to it. Look for the blanked off pin and line the connector up with it. 

 

[Bqtacke222]

4 minutes ago, Oshino Shinobu said:

It will be a header like this, they will have something like "JUSB" next to it. Look for the blanked off pin and line the connector up with it. 

 

I have both ports,may I know which ports to use though.So i just pluck into the last row with the 4 pins 1 with 1 empty slot?

[RadiatingLight]

3 minutes ago, Bqtacke222 said:

I have both ports,may I know which ports to use though.So i just pluck into the last row with the 4 pins 1 with 1 empty slot?

yes

[Bqtacke222]

7 minutes ago, RadiatingLight said:

yes

Thank you!