Jump to content

Fan setup?

Liammmmm
 Share
Posted
15 minutes ago, Liammmmm said:

Hey I just want to know if this fan setup is any good for a front mount radiator?

show us your other fans and their orientations

"Sulit" (adj.) something that is worth it

i7 8700K 4.8Ghz delidded / Corsair H100i V2 / Asus Strix Z370-F / G.Skill Trident Z RGB 16GB 3200 / EVGA GTX 1080Ti FTW3 / ASUS ROG SWIFT PG279Q

Samsung 850 EVO 500GB & 250GB - Crucial MX300 M.2 525GB / Fractal Design Define S / Corsair K70 MX Reds / Logitech G502 / Beyerdynamic DT770 250Ohm

SMSL SD793II AMP/DAC - Schiit Magni 3 / PCPP

Old Rig

i5 2500k 4.5Ghz | Gigabyte Z68XP-UD3P | Zotac GTX 980 AMP! Extreme | Crucial Ballistix Tactical 16GB 1866MHz

Link to comment
https://linustechtips.com/topic/782637-fan-setup/#findComment-9866161
Share on other sites
Link to post
Share on other sites
Posted
15 minutes ago, Liammmmm said:

Hey I just want to know if this fan setup is any good for a front mount radiator?IMG_1409.thumb.JPG.7e29e5cfdbe9d2b18873b48f41a0e3a0.JPG

I'm pretty sure that is going to push the air out on the front but yeah we need to know the rest of the fan setup to determine if is it good

I recommend using push + top when using radiators anyway

Link to comment
https://linustechtips.com/topic/782637-fan-setup/#findComment-9866169
Share on other sites
Link to post
Share on other sites
Posted

Just a logical question, wouldn't you want fresh cool air going through the radiator and not preheated case air? 

 

Then Pull would be better than push. 

Main System:

Anghammarad : Asrock Taichi x570, AMD Ryzen 7 5800X @4900 MHz. 32 GB DDR4 3600, some NVME SSDs, Gainward Phoenix RTX 3070TI

 

System 2 "Igluna" AsRock Fatal1ty Z77 Pro, Core I5 3570k @4300, 16 GB Ram DDR3 2133, some SSD, and a 2 TB HDD each, Gainward Phantom 760GTX.

System 3 "Inskah" AsRock Fatal1ty Z77 Pro, Core I5 3570k @4300, 16 GB Ram DDR3 2133, some SSD, and a 2 TB HDD each, Gainward Phantom 760GTX.

 

On the Road: Acer Aspire 5 Model A515-51G-54FD, Intel Core i5 7200U, 8 GB DDR4 Ram, 120 GB SSD, 1 TB SSD, Intel CPU GFX and Nvidia MX 150, Full HD IPS display

 

Media System "Vio": Aorus Elite AX V2, Ryzen 7 5700X, 64 GB Ram DDR4 3200 Mushkin, 1 275 GB Crucial MX SSD, 1 tb Crucial MX500 SSD. IBM 5015 Megaraid, 4 Seagate Ironwolf 4TB HDD in raid 5, 4 WD RED 4 tb in another Raid 5, Gainward Phoenix GTX 1060

 

(Abit Fatal1ty FP9 IN SLI, C2Duo E8400, 6 GB Ram DDR2 800, far too less diskspace, Gainward Phantom 560 GTX broken need fixing)

 

Nostalgia: Amiga 1200, Tower Build, CPU/FPU/MMU 68EC020, 68030, 68882 @50 Mhz, 10 MByte ram (2 MB Chip, 8 MB Fast), Fast SCSI II, 2 CDRoms, 2 1 GB SCSI II IBM Harddrives, 512 MB Quantum Lightning HDD, self soldered Sync changer to attach VGA displays, WLAN

Link to comment
https://linustechtips.com/topic/782637-fan-setup/#findComment-9866183
Share on other sites
Link to post
Share on other sites
Posted
13 minutes ago, Anghammarad said:

Just a logical question, wouldn't you want fresh cool air going through the radiator and not preheated case air? 

 

Then Pull would be better than push. 

Call me stupid but many people recommend push + top as exhaust and you can have all the other fans as intake and reach a positive air pressure

I know it's looks unlogical(? is this even a word?) too and hot air tends to reach higher altitude so top as intake would just deny the hot from escape where they want most and pushing out in other places

But it's always personal references

Link to comment
https://linustechtips.com/topic/782637-fan-setup/#findComment-9866234
Share on other sites
Link to post
Share on other sites
Posted

Yes. From the pictures I thought the rad is down in front. then pull and the top ones push. 

 

Bottom of case pull in, top of case push out... yep. Logical Mr. McCoy =P

 

Main System:

Anghammarad : Asrock Taichi x570, AMD Ryzen 7 5800X @4900 MHz. 32 GB DDR4 3600, some NVME SSDs, Gainward Phoenix RTX 3070TI

 

System 2 "Igluna" AsRock Fatal1ty Z77 Pro, Core I5 3570k @4300, 16 GB Ram DDR3 2133, some SSD, and a 2 TB HDD each, Gainward Phantom 760GTX.

System 3 "Inskah" AsRock Fatal1ty Z77 Pro, Core I5 3570k @4300, 16 GB Ram DDR3 2133, some SSD, and a 2 TB HDD each, Gainward Phantom 760GTX.

 

On the Road: Acer Aspire 5 Model A515-51G-54FD, Intel Core i5 7200U, 8 GB DDR4 Ram, 120 GB SSD, 1 TB SSD, Intel CPU GFX and Nvidia MX 150, Full HD IPS display

 

Media System "Vio": Aorus Elite AX V2, Ryzen 7 5700X, 64 GB Ram DDR4 3200 Mushkin, 1 275 GB Crucial MX SSD, 1 tb Crucial MX500 SSD. IBM 5015 Megaraid, 4 Seagate Ironwolf 4TB HDD in raid 5, 4 WD RED 4 tb in another Raid 5, Gainward Phoenix GTX 1060

 

(Abit Fatal1ty FP9 IN SLI, C2Duo E8400, 6 GB Ram DDR2 800, far too less diskspace, Gainward Phantom 560 GTX broken need fixing)

 

Nostalgia: Amiga 1200, Tower Build, CPU/FPU/MMU 68EC020, 68030, 68882 @50 Mhz, 10 MByte ram (2 MB Chip, 8 MB Fast), Fast SCSI II, 2 CDRoms, 2 1 GB SCSI II IBM Harddrives, 512 MB Quantum Lightning HDD, self soldered Sync changer to attach VGA displays, WLAN

Link to comment
https://linustechtips.com/topic/782637-fan-setup/#findComment-9866254
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×