BSOD on startup

[tydraestor]

Recently i upgraded from a 295x2 to a 1080, after this happened my PC will not boot into any windows (linux just hangs) i have a fx-8350 CPU. Please help, ive been at this all day trying to fix it

[Guest]

Just now, tydraestor said:

Recently i upgraded from a 295x2 to a 1080, after this happened my PC will not boot into any windows (linux just hangs) i have a fx-8350 CPU. Please help, ive been at this all day trying to fix it

can you elaborate?

[tydraestor]

1 hour ago, deXxterlab97 said:

can you elaborate?

What do you need me to elaborate on

 

[Guest]

Just now, tydraestor said:

What do you need me to elaborate on

 

Is it BSOD? What error code? What exactly is hanging? Where is it hanging? During GRUB? During login? Is it a infinite Windows loop or what?

 

Saying will not boot into any windows isn't really descriptive 

[tydraestor]

1 hour ago, deXxterlab97 said:

Is it BSOD? What error code? What exactly is hanging? Where is it hanging? During GRUB? During login? Is it a infinite Windows loop or what?

 

Saying will not boot into any windows isn't really descriptive 

When its "starting up" and the little bubbles move, after about a second it just freezes and BSOD's and instantly resets, i cannot get the Error because it resets to quick (pretty much a flash) linux was booting infinitely, im currently trying another startup disk for Ubuntu

[tydraestor]

1 hour ago, tydraestor said:

When its "starting up" and the little bubbles move, after about a second it just freezes and BSOD's and instantly resets, i cannot get the Error because it resets to quick (pretty much a flash) linux was booting infinitely, im currently trying another startup disk for Ubuntu

UPDATE: It says "unknown chip-set" when trying to boot into linux and then it just will hang in the boot up

[bcguru9384]

pull gpu card or cards 

without them in reboot let system beep or run about 15 seconds shut down reinstall cards

[tydraestor]

1 hour ago, bcguru9384 said:

pull gpu card or cards 

without them in reboot let system beep or run about 15 seconds shut down reinstall cards

Trying it now, i will tag you when something happens

 

[tydraestor]

1 hour ago, tydraestor said:

Trying it now, i will tag you when something happens

 

@bcguru9384this did not work, same error

[bcguru9384]

sometimes it clears flags

you could also put old card back in

uninstall driver for card 

shutdown put new card in then reboot and driver install

[tydraestor]

1 hour ago, bcguru9384 said:

sometimes it clears flags

you could also put old card back in

uninstall driver for card 

shutdown put new card in then reboot and driver install

When i tried a 650ti it just got to the screen that has "ubuntu" in the middle and freezes

[bcguru9384]

put your 295 setup back in.  both 295   i think your system still thinks its sli mode is on

 

[Guest]

Just now, bcguru9384 said:

put your 295 setup back in.  both 295   i think your system still thinks its sli mode is on

 

1. 295 is an AMD card

2. 295x2 is not 295 in crossfire, it's a single card

 

[tydraestor]

1 hour ago, bcguru9384 said:

put your 295 setup back in.  both 295   i think your system still thinks its sli mode is on

 

i dont have it anymore

 

[Guest]

6 minutes ago, tydraestor said:

When i tried a 650ti it just got to the screen that has "ubuntu" in the middle and freezes

Try clearing mobo CMOS

[tydraestor]

1 hour ago, deXxterlab97 said:

Try clearing mobo CMOS

Did that

 

[bcguru9384]

no cmos not gonna help as windows and linux both will do an auto revert to basic graphics or vga mode

this is in the gpu software when either system tries to hand over control

hmmmmm

can you boot a windows cd and get command line???

[tydraestor]

1 hour ago, bcguru9384 said:

no cmos not gonna help as windows and linux both will do an auto revert to basic graphics or vga mode

this is in the gpu software when either system tries to hand over control

hmmmmm

can you boot a windows cd and get command line???

i dont have a CD for windows, i used an ISO  and a flashdrive

[bcguru9384]

can you get into bios?

do you have a extra hdd??

does bios support PXE boot???

 

[tydraestor]

1 hour ago, bcguru9384 said:

can you get into bios?

do you have a extra hdd??

does bios support PXE boot???

 

yes, i have 4. Im not sure i have a asus m5a97 r2.0

[bcguru9384]

open bios and look to see if network or pxe is option

if yes then your gonna have to websearch

pxe install windows or linux 

this is complicated to do

??? is windows iso still on hdd?  if yes we need cmd line and can just rebuild a bootable iso on flash drive or spare hdd  this easier then pxe but still complicated as no gui. but if we get a cmd line we maybeable run windows in restore mode.   

is this a custombuild pc or manufacturer build??? if manufacturer and still originall hdd we have restore options f# key away

[tydraestor]

1 hour ago, bcguru9384 said:

open bios and look to see if network or pxe is option

if yes then your gonna have to websearch

pxe install windows or linux 

this is complicated to do

??? is windows iso still on hdd?  if yes we need cmd line and can just rebuild a bootable iso on flash drive or spare hdd  this easier then pxe but still complicated as no gui. but if we get a cmd line we maybeable run windows in restore mode.   

is this a custombuild pc or manufacturer build??? if manufacturer and still originall hdd we have restore options f# key away

Custom PC

 

[bcguru9384]

can you open bios and take pics of menu options

your board has lots neat remote abilities 

but i think the tpu or epu have flags set for previous gpu card

i bet thier software is seperate bios 

now a conflict is occuring 

i need to see bios menus and options

[tydraestor]

1 hour ago, bcguru9384 said:

can you open bios and take pics of menu options

your board has lots neat remote abilities 

but i think the tpu or epu have flags set for previous gpu card

i bet thier software is seperate bios 

now a conflict is occuring 

i need to see bios menus and options

Im going to do it later its 10 at night and ive been trying all day

[bcguru9384]

okie dokie

ill click follow and keep an eye out