Jump to content

Water Cooling Cost

Go to solution Solved by Skiiwee29,
Just now, TroubleMaker023 said:

Well somebody one told, I only have to drain the loop once a year if I only use distilled water (which I'm planning to do).

Is that accurate, of course I would use PT Nuke along with it. 

if your using just distilled water, then yes you would be fine once a year. Only if you were using an opaque additive such as Mayhem Pastel would you want/need to do it every 6 months. 

Hey community, 

 

I've got a question.

I'm about to build my first water cooled system, and so far it costs me ~800€ or 850$. 

That's a lot of money to spend, but the loop at least to my knowledge is reusable, so I will only have to replace my CPU Block or GPU Block once I buy new hardware or Tubes. 

It's that true or do I have to replace Radiators and Pumps often as well. 

 

I don't want to get into water cooling if it costs me a lot of money in the long run. 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/
Share on other sites

Link to post
Share on other sites

As long as you do proper maintenance on your loop, you souldnt have any problems. It is recommended you do a drain/flush on your loop every 6 months if you are using any type of opaque additive to your loop, such as Mayhems Pastel as they do gunk things up. You should also about once a year disassemble your CPU and GPU blocks to give them a good cleaning to remove any build up on them. If you have EK blocks, then they will have tutorials on their website on how to do this. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570392
Share on other sites

Link to post
Share on other sites

2 minutes ago, legacy99 said:

As long as you do proper maintenance on your loop, you souldnt have any problems. It is recommended you do a drain/flush on your loop every 6 months if you are using any type of opaque additive to your loop, such as Mayhems Pastel as they do gunk things up. You should also about once a year disassemble your CPU and GPU blocks to give them a good cleaning to remove any build up on them. If you have EK blocks, then they will have tutorials on their website on how to do this. 

Well somebody one told, I only have to drain the loop once a year if I only use distilled water (which I'm planning to do).

Is that accurate, of course I would use PT Nuke along with it. 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570408
Share on other sites

Link to post
Share on other sites

Just now, TroubleMaker023 said:

Well somebody one told, I only have to drain the loop once a year if I only use distilled water (which I'm planning to do).

Is that accurate, of course I would use PT Nuke along with it. 

if your using just distilled water, then yes you would be fine once a year. Only if you were using an opaque additive such as Mayhem Pastel would you want/need to do it every 6 months. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570413
Share on other sites

Link to post
Share on other sites

2 minutes ago, legacy99 said:

if your using just distilled water, then yes you would be fine once a year. Only if you were using an opaque additive such as Mayhem Pastel would you want/need to do it every 6 months. 

Nope I'm just here for the cooling Performance ^^, so basically one could say that you have to replace tubing every so often but I don't have to replace Rads or Pumps often ?

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570430
Share on other sites

Link to post
Share on other sites

Just now, TroubleMaker023 said:

Nope I'm just here for the cooling Performance ^^, so basically one could say that you have to replace tubing every so often but I don't have to replace Rads or Pumps often ?

correct. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570434
Share on other sites

Link to post
Share on other sites

4 minutes ago, Daniel Z. said:

I would get a coolant because they contain biocide and anticorrosive agents. Just make sure they are compatible with your tubing. Ethylene glycol coolants don't work with petg

He is using an additive for that called PT Nuke. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570435
Share on other sites

Link to post
Share on other sites

3 minutes ago, Daniel Z. said:

I would get a coolant because they contain biocide and anticorrosive agents. Just make sure they are compatible with your tubing. Ethylene glycol coolants don't work with petg

Can't i just use some Anti Corrosive agents and biocides without color ?

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570436
Share on other sites

Link to post
Share on other sites

1 minute ago, TroubleMaker023 said:

Can't i just use some Anti Corrosive agents and biocides without color ?

Yes, your plan to use PT Nuke is just fine. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570443
Share on other sites

Link to post
Share on other sites

Just now, TroubleMaker023 said:

Can't i just use some Anti Corrosive agents and biocides without color ?

Yes, just add them into distilled water. Our tap water in Abbotsford BC has the best tap water in the world so it's kinda unnecessary

Link to comment
https://linustechtips.com/topic/756959-water-cooling-cost/#findComment-9570448
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×