Help!!!

[ScarTheVillain]

im kinda new to building computers and i really need help I bought these parts https://pcpartpicker.com/list/z6MY8K

i know I listed 2 different types of ram it's because I thought I bought faulty ram with the evo set. 

 

In other word I have all these hooked up and I can't get my computer to show nothing on my monitor, the fans are all on and they DONT cut off so I know it's getting power from the motherboard , also my usb slots on the mobo don't power up my keyboard either there is a solid red light over the dram indicator Aswell So I tried different slots and that didn't resolve the problem 

 

24pin on the right and the 8pin on top 

[gtx1060=value]

i would get a bios update - and also YOU CAN'T USE DDR3 RAM IN THAT MOBO

[COUPER MILLAR]

1. Ram should all be in the same color dim slot.  Look in your mother board manual to see which ones are channel a and b. It must be the ddr4 as that motherboard is not compatible with ddr3 

2. Put your gpu in the 1st pcie slot

 

Edit: pc parts picker already told you the ballistics memory isn't compatible with that motherboard. 

Edited February 22, 2017 by COUPER MILLAR

[Megah3rtz]

You can't use DDR3 AT ALL with X99 

[ScarTheVillain]

19 minutes ago, gtx1060=value said:

i would get a bios update - and also YOU CAN'T USE DDR3 RAM IN THAT MOBO

I can't even make it to the bios screen , sorry I may have clicked the wrong set. It they are ddr4 

[ScarTheVillain]

19 minutes ago, COUPER MILLAR said:

1. Ram should all be in the same color dim slot.  Look in your mother board manual to see which ones are channel a and b. It must be the ddr4 as that motherboard is not compatible with ddr3 

2. Put your gpu in the 1st pcie slot

 

Edit: pc parts picker already told you the ballistics memory isn't compatible with that motherboard. 

I try that out and let you know sorry I was in such a rush to post I clicked the wrong set but mine are ddr4

[COUPER MILLAR]

54 minutes ago, ScarTheVillain said:

I try that out and let you know sorry I was in such a rush to post I clicked the wrong set but mine are ddr4

OK,  sounds like it's just an issue of not populating the right channels,  I did the same thing when I built my system. Hopefully it works out for you!