First Windows Install on Custom PC

[SwervinPersian]

So I have finished my first custom PC and I bought a OEM Windows 10.

It came with the license key & a USB stick where it was installed on. 

My question is what do I need to do?

 

just turn on my pc and stick in the USB?

 

[Mira Yurizaki]

Put the USB stick in first then turn on the PC.

[3 Lions]

Once you turn on the PC you'll have to go into the boot priority on the BIOS and select 'Boot from USB' so it allows the installer to load. 

[SwervinPersian]

8 minutes ago, LinusTechTipsFanFromDarlo said:

Once you turn on the PC you'll have to go into the boot priority on the BIOS and select 'Boot from USB' so it allows the installer to load. 

I get there by pressing the delete key right? 

Also at what stage do I insert the USB? 

Before I change the 'Boot from USB' or after I changed that setting?

 

just want to make sure, it's my first time

[3 Lions]

1 minute ago, SwervinPersian said:

I get there by pressing the delete key right? 

Also at what stage do I insert the USB? 

Before I change the 'Boot from USB' or after I changed that setting?

 

just want to make sure, it's my first time

Yes

Before you start the PC

Yes

[SwervinPersian]

3 minutes ago, LinusTechTipsFanFromDarlo said:

Yes

Before you start the PC

Yes

Thank you. Will I need to change this setting later on?

[LogicalDrm]

15 hours ago, SwervinPersian said:

Thank you. Will I need to change this setting later on?

Nope. The way boot queue works is that BIOS/UEFI checks if any device set to 1st priority is bootable. If not, it will continue to next and check that. 2nd should be drive with OS, so booting will continue to that. If you happened to have the USB still connected on next boot, you'd get that same "Press key to boot from USB" for 10s before check continues to next step.