Light?

[Ineedyerhel!]

I am dealing w/ a light board for my school.(the behringer eurolight lc2412) It used to work but for some reason It has stopped working and I don't know why. All of the connections seem to be solid such as the connection from the board to the interface and the interface to the dimmer. 

 Any advice?

[The Sloth]

here i am a fan of looking through manual if there is a problem, hope this helps. http://www.fullcompass.com/common/files/3816-LC2412OwnersManual.pdf

[TheKDub]

8 minutes ago, Ineedyerhel! said:

I am dealing w/ a light board for my school.(the behringer eurolight lc2412) It used to work but for some reason It has stopped working and I don't know why. All of the connections seem to be solid such as the connection from the board to the interface and the interface to the dimmer. 

 Any advice?

 

I'd need more info on the entire setup for your school to give more help, but make sure that all the DMX connections are correct, make sure the fixtures are being supplied power as well.

 

If you're using LEDs, make sure that they're addressed correctly so the console can use them.

[it_dont_work]

Did you check if someone's changed the mode? if it's been put into scene program, and there's no scene banks set you'll get the same results you've got now.

 

If you've got old dimmer racks you might need to check the dmx channel banks manually on each rack.

[Godlygamer23]

Did you actually look at the board and other components, and see their current condition?