Is it the ram?

[ChristianK 87]

completed a pc build, and getting error code 19

 

ASRock Fatal1ty Z270 Gaming K6, i7 7700k, corsair vengeance lpx ddr4 2x16 2400mhz

[Guest]

Try putting a single stick of RAM see what happens, see what happens when none RAM is installed if you want to be sure

[Oshino Shinobu]

According to ASRock's site, error code 19 (and a load of others it is bunched with) is an error related to memory. Recommendation is to reinstall the RAM and reset CMOS. If it doesn't work, try with only one stick, then try each individual combination of modules and slots to see what works. Could be a dead stick or a dead slot, so you'll have to figure it out by trial and error. 

 

 

[knightslugger]

On what device or service? Unspecified?

 

oh wait, POST error code 19?

[ChristianK 87]

i reset the cmos between every time trying different combinations of ram placements, now i have a single ram stick,and getting code 62

[ChristianK 87]

code 61-91 is :  Chipset initialization error. Please press reset or clear CMOS.

 

 

 

@deXxterlab97

[ChristianK 87]

yes @knightslugger