SLi SPACING PLEASE HELP

[PRYNC3GAM1NG]

i have been trying to wrap my head around this for quite a while im trying to figure out what sli spacing my motherboard takes i have already checked the manual and it doesnt help me out one bit so if anyone can take a look at the motherboard to give me a hand that would be great http://www.gigabyte.com/products/product-page.aspx?pid=5496#ov

[MorganO]

4 minutes ago, PRYNC3GAM1NG said:

i have been trying to wrap my head around this for quite a while im trying to figure out what sli spacing my motherboard takes i have already checked the manual and it doesnt help me out one bit so if anyone can take a look at the motherboard to give me a hand that would be great http://www.gigabyte.com/products/product-page.aspx?pid=5496#ov

most likely slot one and 3

link takes ages to load what motherboard is it?

[PRYNC3GAM1NG]

sorry i was actually referring to the high-bandwidth bridge

 

and its actually the first 2

[PRYNC3GAM1NG]

mb_manual_ga-z170xp-sli_e (1).pdf

[manikyath]

gigabyte's website is being 1960s again, but after loading for 57 years i found a picture on the page that shows two GPUs intalled in slot 2 (topmost x16 slot) and 5 (the second x16 slot, between the two legacy slots), so my guess is, like the majority of motherboards, that's how gigabyte suggests you to do it.

 

EDIT: also, that means you need the 3-slot high bandwidth bridge. not the one to squeeze your GPUs together in a toaster configuration, but the one one size bigger.

[PRYNC3GAM1NG]

i understand that much for sure but im referring to the spacing for a high-bandwidth bridge from EVGA do i got 2 slot spacing 1 slot spacing 

[MVPernula]

2 minutes ago, PRYNC3GAM1NG said:

i understand that much for sure but im referring to the spacing for a high-bandwidth bridge from EVGA do i got 2 slot spacing 1 slot spacing 

Remember to QUOTE!

If you don't we wont get answers.

 

You do that by pressing the small arrows under the comments.