Mini itx screws..

[nunocv]

I mounted a mini itx board on the CM n200, and got misleaded by the appearence of the psu  and mobo screws... They were almost identical but the psu ones were a little bit bigger. So I screwed all the standfoffs lke this

O X
O O

The psu one went on the X, doesnt go all the way in and doesnt come out... (Its half way in).
Is there a problem in stability? Will it damage the board in some time?
Thanks.

[TheRandomness]

It should be completely fine, but it wouldn't hurt to try your hardest to remove the screw and replace it with the correct one.

[OsuMasterz]

As long as it's not bending the board hardcore, you're fine.

[nunocv]

1 minute ago, OsuMasterz said:

As long as it's not bending the board hardcore, you're fine.

Bending? How could it bend?

[nunocv]

3 minutes ago, TheRandomness said:

It should be completely fine, but it wouldn't hurt to try your hardest to remove the screw and replace it with the correct one.

Thing is, Its not my pc... I dont have it at the moment... But I tried to remove it and the stand off came out

[OsuMasterz]

1 minute ago, nunocv said:

Bending? How could it bend?

unequal tension between the screws, it doesn't need to be exact but no blatant.

[TheRandomness]

5 minutes ago, nunocv said:

Thing is, Its not my pc... I dont have it at the moment... But I tried to remove it and the stand off came out

Hold the stand-off with pliers and try again

[Windows7ge]

5 minutes ago, nunocv said:

Thing is, Its not my pc... I dont have it at the moment... But I tried to remove it and the stand off came out

(remove the motherboard) Pinch the standoff with a pair of pliers turn the screw counterclockwise with a proper fit screwdriver. Should come out.

[nunocv]

9 minutes ago, Windows7ge said:

(remove the motherboard) Pinch the standoff with a pair of pliers turn the screw counterclockwise with a proper fit screwdriver. Should come out.

But you think it can cause problems? I cant do that atm so...

[nunocv]

32 minutes ago, OsuMasterz said:

unequal tension between the screws, it doesn't need to be exact but no blatant.

So being

O X
O O doesnt cause much unequal tension?

[OsuMasterz]

1 hour ago, nunocv said:

So being

O X
O O doesnt cause much unequal tension?

Not really

[Windows7ge]

7 hours ago, nunocv said:

But you think it can cause problems? I cant do that atm so...

Shouldn't cause any issues. If the chassis is shipped somewhere it might have problems but stationary it shouldn't affect anything.