NAS unRAID build will not start

[iHoller]

My home build NAS server will not startup, its newly build and will not start for the first time.

 

Hardware:

• Moterboard: Intel server board S5520HC
• Ram: 48 GB ddr3 ram
• PSU: Corsair HX750i
• GPU: GeForce GT 710 mini
• CPU: 2x Xeon X5660
• CPU cooler: 2x Intel BXSTS100C 
• HDD: 3x WD 5TB RED NAS
• SSD: 1x Samsung 750, 250gb

When i turn it on, all fans start og run, they drives start spinning.

The problem is that no video output starts op, not on the onboard and not on the GPU.

i have tried both HDMI and VGA.

 

What can be the problem?

[jj9987]

You don't really need video output. Once unRAID boots up and has network connection, you can just browse to it via the IP (if you can get it from your router/DHCP server) or via //tower

[iHoller]

11 minutes ago, jj9987 said:

You don't really need video output. Once unRAID boots up and has network connection, you can just browse to it via the IP (if you can get it from your router/DHCP server) or via //tower

i need to set bios for USB booting or that will not work  but can't get into BIOS with no screen

[iHoller]

Now tried:

- Booting unRAID fra USB, the ports doesn't answer and looks like they don't get power

- then tried with external USB direct from the motherboard, still nothing.

- Tried taking the ram out, and se what happens, still nothing.

 

All fan still keeps spinning but can't get it to work.

[WkdPaul]

clear the CMOS, should be jumper J1E6 near the SATA connectors.

 

1. unplug the PSU
2. move the jumper to pins 2&3 and wait 10 seconds
3. move back the jumper to pins 1&2
4. plug back the PSU
5. profit

 

hope this helps!