Overkill?

[PcNoooob]

Hey everyone

 

I was just wondering 

 

Is a 3x120mm intake and 1x120mm exhaust overkill for the following build?

 

CPU - A10 7860K (black edition)

RAM - 8gb ddr3 1600mhz

HDD - 1TB toshiba 7200rpm 

No GPU

 

Will install a GTX1050TI 4GB down the line 

 

Thanks in advance 

[A Silver]

I have the same amount of fans and my pc runs at good temperature but i have different hardware so its hard to say but it should be fine

[Matt_98]

5 minutes ago, PcNoooob said:

Hey everyone

 

I was just wondering 

 

Is a 3x120mm intake and 1x120mm exhaust overkill for the following build?

 

CPU - A10 7860K (black edition)

RAM - 8gb ddr3 1600mhz

HDD - 1TB toshiba 7200rpm 

No GPU

 

Will install a GTX1050TI 4GB down the line 

 

Thanks in advance 

 

not really but if you can replace the stock cooler they are crap. my 7850K did fine with only one intake and no exhaust

[8-Bit Ninja]

3 intake is a tad over the top, 2 intake 1 exhaust would be fine

[PcNoooob]

On 2016/11/21 at 4:40 PM, 8-Bit Ninja said:

3 intake is a tad over the top, 2 intake 1 exhaust would be fine

Yeah I found out the hard way. Got all 4 fans connected to the mobo and 80% of the time the front 2 intakes are not even spinning because mobo temp is below 40 degrees

[PcNoooob]

On 2016/11/21 at 4:29 PM, Matt_98 said:

not really but if you can replace the stock cooler they are crap. my 7850K did fine with only one intake and no exhaust

i'm looking at the cooler master 212 but I'm worried about RAM clearance

[Mobby Dick]

 

Everythings that is more than 2 intake and 1 exhaust is useless, especially for that system

[Matt_98]

14 hours ago, PcNoooob said:

i'm looking at the cooler master 212 but I'm worried about RAM clearance

I had a 212 evo with a A88XM-A motherboard and the clerance was fine with my kingston savage RAM