1060 6GB Performance

[LambdaCat]

So I have just upgraded my GPU from a 750ti to a 1060 6GB and i am not noticing much performance change.

The system fully recognizes its existance and it has all of its drivers but it just under performs like hell, might it be my 3.2GHz CPU or is it something i forgot to do. if i try to use GPU tweak 2 its seams to make no effect. The fans won't go on and i set them to gon on at aboput 50C but the card only ever reachees around 43C. What is going on ?

[NunoLava1998]

4 minutes ago, Ranger515 said:

So I have just upgraded my GPU from a 750ti to a 1060 6GB and i am not noticing much performance change.

The system fully recognizes its existance and it has all of its drivers but it just under performs like hell, might it be my 3.2GHz CPU or is it something i forgot to do. if i try to use GPU tweak 2 its seams to make no effect. The fans won't go on and i set them to gon on at aboput 50C but the card only ever reachees around 43C. What is going on ?

you probably have intel graphics

go to the BIOS, disable it and boot up

[LambdaCat]

2 minutes ago, NunoLava1998 said:

43C is very good for a video card. Keep it.

Yeah but on Rise of Tomb Raider and Heaven Benchmark i only get 20-30 odd FPS.

[NunoLava1998]

Just now, Ranger515 said:

Yeah but on Rise of Tomb Raider and Heaven Benchmark i only get 20-30 odd FPS.

So? You probably have intel/integrated into CPU graphics enabled by default. Disable that. Enter the BIOS and disable Intel/integrated into CPU graphics, save and reboot.

If you have an APU, disable integrated graphics.

If you have a i3/i5/i7/Xeon, disable Intel/integrated graphics.

[martward]

Check if you connected everything okay and disable the igpu of the processor. Looks like you are not actually using the GPU since 43 degrees are idle temps. 

[LambdaCat]

2 minutes ago, NunoLava1998 said:

So? You probably have intel/integrated into CPU graphics enabled by default. Disable that. Enter the BIOS and disable Intel/integrated into CPU graphics, save and reboot.

If you have an APU, disable integrated graphics.

If you have a i3/i5/i7/Xeon, disable Intel/integrated graphics.

hmmmmm... i shall give it a shot. THX ill let you know hoe it goes

 

[LambdaCat]

THX Guys this makes sense will give a whirl

 

[LambdaCat]

42 minutes ago, martward said:

Check if you connected everything okay and disable the igpu of the processor. Looks like you are not actually using the GPU since 43 degrees are idle temps. 

How would this actually be done, i tried it but couldnt really find an option in the bios. And whenever i benchmark or whatever it says its using the 1060. 

[NunoLava1998]

 

3 minutes ago, Ranger515 said:

How would this actually be done, i tried it but couldnt really find an option in the bios. And whenever i benchmark or whatever it says its using the 1060. 

Uhh... fire up minecraft, press F3 and see what GPU it is using.

[LambdaCat]

4 minutes ago, NunoLava1998 said:

 

Uhh... fire up minecraft, press F3 and see what GPU it is using.

Geforce GTX 1060 6GB

[NunoLava1998]

Just now, Ranger515 said:

Geforce GTX 1060 6GB

Uh... disable VSync and give me your fps on a flat world.

[LambdaCat]

5 minutes ago, NunoLava1998 said:

Uh... disable VSync and give me your fps on a flat world.

Standing idle 100-190 fps, i cant finbd the vsync option as i am using optifine. but if i try using heavenbn or rise of tomb raider benchmark im getting 25 avg FPS

[NunoLava1998]

1 minute ago, Ranger515 said:

Standing idle 100-190 fps, i cant finbd the vsync option as i am using optifine. but if i try using heavenbn or rise of tomb raider benchmark im getting 25 avg FPS

Turn the frame rate to the lowest setting and it should appear. Click on that and put it up again.

[LambdaCat]

3 minutes ago, NunoLava1998 said:

Turn the frame rate to the lowest setting and it should appear. Click on that and put it up again.

i pulled th slider back it said vsync but no new option appeared and now when i pull it up its capping at 60fps

[LambdaCat]

5 minutes ago, NunoLava1998 said:

Turn the frame rate to the lowest setting and it should appear. Click on that and put it up again.

Are yopu sure i might not be getting any bottlenecks? 

[LordOfPancakes]

2 minutes ago, Ranger515 said:

Are yopu sure i might not be getting any bottlenecks? 

My build is having a bad problem right now, which might be relate to yours. What is happening is my cpu is usually at 100% usage (it's not supposed to be) while my gpu is usually only at 60-85% (This is supposed to be the higher value). I have a i5-6500 at 3.4ghz and a EVGA 1060 FTW+ at 2038mhz, and things perform like garbage. The only fixes I've found that work in general for people is if they have dual channel ram (I don't).

[LambdaCat]

5 minutes ago, NunoLava1998 said:

Turn the frame rate to the lowest setting and it should appear. Click on that and put it up again.

Are yopu sure i might not be getting any bottlenecks? 

[LambdaCat]

9 minutes ago, LordOfPancakes said:

My build is having a bad problem right now, which might be relate to yours. What is happening is my cpu is usually at 100% usage (it's not supposed to be) while my gpu is usually only at 60-85% (This is supposed to be the higher value). I have a i5-6500 at 3.4ghz and a EVGA 1060 FTW+ at 2038mhz, and things perform like garbage. The only fixes I've found that work in general for people is if they have dual channel ram (I don't).

Im pretty sure i have dual channel ram, but my cpu isnt going that high, im just getting rubbish performance. Afterburner and GPU Tweak tell me the card is going at 2050MHz clock with mem clock at 810 MHz and a temp of 43C

[LordOfPancakes]

3 minutes ago, Ranger515 said:

Im pretty sure i have dual channel ram, but my cpu isnt going that high, im just getting rubbish performance. Afterburner and GPU Tweak tell me the card is going at 2050MHz clock with mem clock at 810 MHz and a temp of 43C

those are it under full load?

[LambdaCat]

5 minutes ago, LordOfPancakes said:

those are it under full load?

Im not sure it even goes to full load. and now ive tried ipdating the driver my monitors arent detecting a signal and the card is spinning like mad