Problems with my first build, help with BIOS

[JackalJ]

Hi,

 

So I completed my new build and I am installing everything I need atm. But I do have a problem with some bios settings.

 

My fans just keep going at max speed, I've tried some different settings in the bios. I tried the qfan (something like that) and adjusted everything to manual. Because the standard, even silent are still a bit loud.

That said I don't really understand all the different settings and option in the bios so I would rather not just go and find it out for myself, just to make sure I don't break anything. (Considering it almost took me 2 months to build this pc. I had some trouble with a few EKWB products.)

 

Some specs:

CPU: Core i7 6900K (might not be that relevant.)

Motherboard: ASUS Rampage V extreme (u3.1)

Videocard: 2x gtx 1080 MSI

Custom loop with 2 extra thick radiators, one with just four fans and the other with 8 fans. One pair of 4 fans on the CPU connector, the pump isn't connected to the motherboard. It only works then, If I connect it to the CPU_opt it won't work and all the other fans are going at full speed. The standard fans in the case ( four in total that I also have connected to a fan controller on the MB) don't work either. 

The other fans on the radiator have been connected to the fan controllers on the motherboard which were available. I am sure I am doing something wrong, either in some setup or wrongly connected fans.

 

Any one can help me? Or give me a rundown of how the setup the bios proper?

 

[WashMachine]

I think if you are running windows ofc. Should check power options under control panel and what setting you chosen High performance/balanced/power saving on my computer high performance will make fans spin fast after a little while and the lowest speed of fans on high performance is more than the lowerst speeds of other two options ... atleast on my pc. i can tell because running stock AMD cooler and thats pretty loud. 

[JackalJ]

Would that explain the not functioning pump? (when it's connected) Or the fans going even faster then they already were.

 

I have managed to set some settings in the Bios (in the fan setup) to be custom. I have gotten the fans a bit slower but still fairly high rpm and high noise. And the pump still doesn't work when it's connected.

 

also just had my first cpu overheating error.