Jump to content

Replacement USB Board

Number
By Number
in Troubleshooting
 Share
Posted

Hello all,

 

I've recently clumsily tripped on the charging cable of my laptop and bent the ac jack. The jack is on the same board as the usb and ethernet so I decided to replace the whole board. I found this on ebay: http://www.ebay.com/itm/LS-B303P-GENUINE-OEM-TOSHIBA-USB-AUDIO-LAN-BOARD-SATELLITE-C55-B-C55-B5201-/232049726434 however the number below the "MHCP" chip does not EXACTLY match the one on mine. The revision on this board is also 1.0 and mine is 2.0. My question is...will this still work with my laptop? My laptop is a Toshiba C55-B5362.

 

Thanks in advance!

Numbre

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Easiest way would be to look inside your laptop and see if the old board and new board are the same shape.

also check the voltages and stuff so you don't fry everything.

 

if the voltages are the same (99% they will be), and the shape is the same, I'm 99% sure it will work 100%

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Desktop:

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 - Lots of RGB lights I never change

Laptop:

HP Spectre X360 - i7 8560U - MX150 - 2TB SSD - 16GB DDR4

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, RadiatingLight said:

Easiest way would be to look inside your laptop and see if the old board and new board are the same shape.

also check the voltages and stuff so you don't fry everything.

 

if the voltages are the same (99% they will be), and the shape is the same, I'm 99% sure it will work 100%

The shape is the same..I can't really power up the laptop since i'm missing the screws for the back cover and I don't really want to run it without it. The charger is also missing right now as well. Everything else on the chip looks the same besides the model number...

Numbre

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
32 minutes ago, Number said:

The shape is the same..I can't really power up the laptop since i'm missing the screws for the back cover and I don't really want to run it without it. The charger is also missing right now as well. Everything else on the chip looks the same besides the model number...

missing screws lol i'm running a laptop with no back cover for ram, cpu, gpu, or mpcie slots :P I use cardboard instead

Use this guide to fix text problems in your post. Go here and here for all your power supply needs

 

New Build Currently Under Construction! See here!!!! -----> 

 

Spoiler

Deathwatch:[CPU I7 4790K @ 4.5GHz][RAM TEAM VULCAN 16 GB 1600][MB ASRock Z97 Anniversary][GPU XFX Radeon RX 480 8GB][STORAGE 250GB SAMSUNG EVO SSD Samsung 2TB HDD 2TB WD External Drive][COOLER Cooler Master Hyper 212 Evo][PSU Cooler Master 650M][Case Thermaltake Core V31]

Spoiler

Cupid:[CPU Core 2 Duo E8600 3.33GHz][RAM 3 GB DDR2][750GB Samsung 2.5" HDD/HDD Seagate 80GB SATA/Samsung 80GB IDE/WD 325GB IDE][MB Acer M1641][CASE Antec][[PSU Altec 425 Watt][GPU Radeon HD 4890 1GB][TP-Link 54MBps Wireless Card]

Spoiler

Carlile: [CPU 2x Pentium 3 1.4GHz][MB ASUS TR-DLS][RAM 2x 512MB DDR ECC Registered][GPU Nvidia TNT2 Pro][PSU Enermax][HDD 1 IDE 160GB, 4 SCSI 70GB][RAID CARD Dell Perc 3]

Spoiler

Zeonnight [CPU AMD Athlon x2 4400][GPU Sapphire Radeon 4650 1GB][RAM 2GB DDR2]

Spoiler

Server [CPU 2x Xeon L5630][PSU Dell Poweredge 850w][HDD 1 SATA 160GB, 3 SAS 146GB][RAID CARD Dell Perc 6i]

Spoiler

Kero [CPU Pentium 1 133Mhz] [GPU Cirrus Logic LCD 1MB Graphics Controller] [Ram 48MB ][HDD 1.4GB Hitachi IDE]

Spoiler

Mining Rig: [CPU Athlon 64 X2 4400+][GPUS 9 RX 560s, 2 RX 570][HDD 160GB something][RAM 8GBs DDR3][PSUs 1 Thermaltake 700w, 2 Delta 900w 120v Server modded]

RAINBOWS!!!

 

 QUOTE ME SO I CAN SEE YOUR REPLYS!!!!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Duct Tape!

                  Did I help you to fix your problem or at least did offer somewhat valuable advice? Consider giving my post a "informative" or "thumbs up".

SYSTEM 2: Modded G3 case with Gigabyte GA-G33M-S2L, Intel E8600 (O.C to 4.2GHz.), 4GB GSkill PC8500, Nvidia 8800GTS (512M), Cooling provided by Scythe Big Shrunkin, HDD 1 = OSX 10.9.5, HDD 2 = Windows 7 Pro X64. (Placed 3rd in MacMod  of the year 2012) (For info see:  http://insanelymac.com/forum/topic/285641-and-the-winner-for-macmod-of-2012-is/

LAPTOP: Inspiron 1720, Modded BIOS, X9000 Core 2 extreme OC'ed and undervolted to 3.4GHz (windows only) , 6GB DDR2 800, 8600M GT, 1920x1200 Glossy display, Sigmatel Audio, 2 Kingston HyperX 120GB drives (1 with Windows 7 x64 pro & 1 with OSX 10.9.5) X9000 Processor World Record Holder since 02/2013 on Geekbench 2 : http://browser.primatelabs.com/geekbench2/search?dir=desc&q=x9000&sort=score

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×