Need help for a leaking pump

[TheRedViper]

Hello there, iv'e had my custom loop up and running for about a month now and I never noticed the leak until today when I added extra RAM. There's a build-up at the bottom of my case and some of my tubes got splashed. My reservoir is about at half instead of 4/5th now. At first I didn't find the leak, it wasn't the tubing or the fittings, but I noticed a small drop forming right under the 90 degres and the side of the pump where the plexiglass meets the plastic with 2 seals. There's 2 screws holding them in place, but they seem to be thight enough. I don't really know what to do now to fix it.

 

[Juanse]

Can you upload a pic? Maybe there's a chance you can RMA the pump

[TheRedViper]

1 minute ago, Juanse said:

Can you upload a pic? Maybe there's a chance you can RMA the pump

Its an AIO, meaning that if I remove it I basically remove everything. Its a swiftech x320x2 prestige. Il upload a pic.

[Juanse]

2 minutes ago, TheRedViper said:

Its an AIO, meaning that if I remove it I basically remove everything. Its a swiftech x320x2 prestige. Il upload a pic.

Oh, then you might just contact swiftech and let them know, did you ever open the loop or anthing?

[TheRedViper]

8 minutes ago, Juanse said:

Oh, then you might just contact swiftech and let them know, did you ever open the loop or anthing?

I did open the loop to extend from CPU to include my 1070 SLI, but I didn't change that connection (stock fitting and tubing) the rest is changed, so I don't see how I could have damaged it or move the o-ring enough to even create a leak.

[Juanse]

Just now, TheRedViper said:

I did open the loop to extend from CPU to include my 1070 SLI, but I didn't change that connection (stock fitting and tubing) the rest is changed, so I don't see how I could have damaged it or move the o-ring enough to even create a leak.

Try talking it with swiftech, maybe they can RMA the thing

[TheRedViper]

Just now, Juanse said:

Try talking it with swiftech, maybe they can RMA the thing

Il send them a message, but I wanna avoid an RMA at all cost. It already took them a month for them to send me replacement screws for their apogee cooler, I won't deal with another month PCless honestly. If the leak cannot be fixed normally, I think il just put some epoxy under there

[TheRedViper]

2 hours ago, Juanse said:

Try talking it with swiftech, maybe they can RMA the thing

Here's some pictures, the leak comes from under where the black plastic meets the plexiglass of the 90 degres.

[Juanse]

2 hours ago, TheRedViper said:

Il send them a message, but I wanna avoid an RMA at all cost. It already took them a month for them to send me replacement screws for their apogee cooler, I won't deal with another month PCless honestly. If the leak cannot be fixed normally, I think il just put some epoxy under there

Good luck, try to get it replaced, it may turn worse

[TheRedViper]

Just now, Juanse said:

I don't know what you mean, It's assemler, we use it to program microchips's PIC16f627a

what?

[Juanse]

Just now, TheRedViper said:

what?

lol wrong post, ignore that