Cpu adaptive mode not working

[CaptainAustin]

Just now, W-L said:

Do you have a screenshot of your setting again for adaptive, also check Linus's quick guide on it that might help a little:

 

Here are the settings. Right when i get into windows i'm at 1.4-1.5V

[W-L]

Just now, CaptainAustin said:

Here are the settings. Right when i get into windows i'm at 1.4-1.5V

Oh set that Turbo Mode CPU core voltage to auto to see what you get when loaded into windows. After if it's reasonable run a stress test (cinebench) to see what voltages it rises up to. 

[CaptainAustin]

6 minutes ago, W-L said:

Oh set that Turbo Mode CPU core voltage to auto to see what you get when loaded into windows. After if it's reasonable run a stress test (cinebench) to see what voltages it rises up to. 

Almost had a heart attack.

[W-L]

6 minutes ago, CaptainAustin said:

Almost had a heart attack.

Hmm that not normal, never seen it do something like that before, were you running a stress test or something?

 

[CaptainAustin]

Just now, W-L said:

Hmm that not normal, never seen it do something like that before, were you running a stress test or something?

 

Yes, Right when i got into windows it was bouncing from 1.38-1.42, I ran Intelburntest and it jumped to that.

[airdeano]

what BIOS are you using? 1102 or better patched some adaptive mode errors

[W-L]

5 minutes ago, CaptainAustin said:

Yes, Right when i got into windows it was bouncing from 1.38-1.42, I ran Intelburntest and it jumped to that.

Do not run any artificial stress tests as mentioned when on adaptive mode, only real world stress test such as cinebench. 

[CaptainAustin]

1 minute ago, airdeano said:

what BIOS are you using? 1102 or better patched some adaptive mode errors

Just flashed 1902

[CaptainAustin]

1 minute ago, W-L said:

Do not run any artificial stress tests as mentioned when on adaptive mode, only real world stress test such as cinebench. 

Ok, I just flashed 1902 let me bench something like that. I will also try rog realbench

[W-L]

2 minutes ago, CaptainAustin said:

Ok, I just flashed 1902 let me bench something like that. I will also try rog realbench

That's an artificial stress test only and only use cinebench if your going with adaptive, nothing else. 

[CaptainAustin]

Finally..... It's topping off at 1.36V and idles at .800V. Seems to be working now after that flash. I will do a 5+ hour stress tomorrow to check for stability. Thank you both of you for your help. @W-L @airdeano