Need Suggestions for itx build

[vinchy]

Current Items

 

Phanteks Evolv Itx Red Special Edition

i5-6500

Msi Gtx 1060 Gaming X

Kingston Hyperx 2x8gb ddr4 black

seasonic m12-ii evo 620w

 

I need suggestions for my motherboad, current motherboard in line is Gigabyte H110N any suggestions? budget for a board is around 90$. 

 

For the fans im thinking of getting a thermaltake ring 120m white to contrast the red and black theme, any other suggestions for fans?

 

Thanks! I really need to finish my build before school starts

 

btw, im based on the philippines so im limited to some brands of items only but im any suggestions

 

Thanks a lot!

 

 

[Scrulls]

As i am pretty biased towards MSI, i suggest the following (in that $ range) mini ITX MB: 

 

http://pcpartpicker.com/product/CsX2FT/msi-motherboard-h110ipro

 

But honestly, the current motherboard that you have in line is pretty much the same. And with Mini ITX's if you have a money roof (90$ in this case) it really depends on what manufacturer you believe the most in. 

 

 

[Scrulls]

15 minutes ago, vinchy said:

snip

 

 

Although if you are unable to find shipping to the Philippines, but yet have access to the  Gigabyte H110N then i think its best to go with it, as shipping fees might be more expensive than the MB itself. itself. 

[vinchy]

one person actually here in philippines is selling a msi h110i but im like torned on what motherboard to get , like which is more reliable in the long run that sort of stuff. btw mate do you think a white thermaltake ring fan will blend in red gpu red interior of the case? 

[vinchy]

10 minutes ago, CUDA_Cores said:

you may want to ask yourself why you are going ITX in the first place. Check my signature below for my take on why I think ATX is better or go with mATX if you want to save space.

i really like itx builds since i first got into pcmr. also i always bring it to my grandmas house to play with my cousins, also on lan parties with my friends its more handy than having a atx or matx. 

[Quaker]

Either the MSI or the Gigabyte motherboard will be fine. They're both about the same level of quality.

 

The case comes with a 200mm front fan. Since you're not going to overclock, you probably don't "need" a 120mm exhaust fan on the rear, but it wouldn't hurt.  Any fan that you like will do in this case, since CFM or air pressure isn't really a concern. You might want to get a "quiet" fan.

 

The case has room for a better CPU cooler, so I'd suggest you get a mid-size cooler such as a CM Hyper 101 or T4, or similar.

That would look better than the stock cooler, be quieter under load, and keep the CPU a bit cooler.

On the other hand there's no need to go for a large cooler such as a CM Hyper 212 size unit.

[vinchy]

24 minutes ago, Quaker said:

Either the MSI or the Gigabyte motherboard will be fine. They're both about the same level of quality.

 

The case comes with a 200mm front fan. Since you're not going to overclock, you probably don't "need" a 120mm exhaust fan on the rear, but it wouldn't hurt.  Any fan that you like will do in this case, since CFM or air pressure isn't really a concern. You might want to get a "quiet" fan.

 

The case has room for a better CPU cooler, so I'd suggest you get a mid-size cooler such as a CM Hyper 101 or T4, or similar.

That would look better than the stock cooler, be quieter under load, and keep the CPU a bit cooler.

On the other hand there's no need to go for a large cooler such as a CM Hyper 212 size unit.

im thinking of getting a thermaltake ring white like 1 - 3 pcs but im not sure if it will blend in to the red interior if the case and gpu. for the cooler im thinking of getting a noctua lowprofile cooler. i just need to be sure for the parts for my build so i will stop for abour 3-6months of not upgrading and after that probably upgrade somethinf on my pc haha