Need help with newly built system

[Gal258]

Whenever I power on the system get no signal in my monitor and the q code led is showing A2(ide detect). I know it's somthing to do with the boot drive/boot sequence. I have a new 850 evo ssd connected to the motherboard and a win10 usb in the rear io. If I try to power the system with just the usb it shows code 99(super io intialization) and when I connect only the ssd its A2 again. Nothing connected its-99. I don't know what to do, can someone please help me?

[SLAYR]

You need to be a but more specific such as what motherboard is it.

 

Can you boot into the bios?

 

The motherboard cannot run the ssd if there isn't an OS on it, boot from the win 10 usb, and have it load win 10 onto the ssd.

[Gal258]

2 minutes ago, SLAYR said:

You need to be a but more specific such as what motherboard is it.

 

Can you boot into the bios?

 

The motherboard cannot run the ssd if there isn't an OS on it, boot from the win 10 usb, and have it load win 10 onto the ssd.

Asus X99 deluxe ii,

no,

how do I choose to boot into the win10 usb without access to the bios? 

And cpu is 5820k so no problem with cpu compatibility. 

[The Elder Smurf]

If the system doesn't post the drives aren't the problem. I would strongly recommend unplugging all components but those needed to post (cpu, 1 ram stick, and power and motherboard). Once the system post, start adding back components 1 by 1 until the system no longer post.