Built custom loop, but having issue with pump not circulating.

[Inferius]

 

So I purchased the parts for a custom loop from EK and for my pump and resevoir I bought EK-DBAY D5 PWM MX - Acetal (incl. pump) and I got all of the tubing connected properly, the 4pin header connected and the other 2pin one connected as well, and filled the resevoir, but it will not move liquid at all. There is a little bit of bubbling coming from the right side (pump side) in the resevoir and there appears to be some motion, but it is just simply not moving the liquid. I can hear the pump on. Thanks for any suggestions.

[DawN the 13 year old]

Have you got enough liquids inside the cooler? You could ruin your PC with too much/little coolant liquid

[W-L]

2 hours ago, Inferius said:

So I purchased the parts for a custom loop from EK and for my pump and resevoir I bought EK-DBAY D5 PWM MX - Acetal (incl. pump)
and I got all of the tubing connected properly, the 4pin header connected and the other 2pin one connected as well, and filled the resevoir, but it will not move liquid at all. There is a little bit of bubbling coming from the right side (pump side) in the resevoir and there appears to be some motion, but it is just simply not moving the liquid. I can hear the pump on. Thanks for any suggestions.

Do you have a photo of the loop, mainly the inlets and outlets of the tubing for the res/pump unit?

 

 

[xgn]

Did you check on you're pc if the Pump is working at all? mine is running on 4800RPM its a D5 pump.