Jump to content
5 minutes ago, brighttail said:

I would say probably not, at least not under warranty.  Bent pins, unless it came like that, isn't usually covered.

That being said, ONE pin out of a thousand shouldn't cause much of an issue if any.  Are you having issues?

 

Most repair places can attempt to bend it back but there is always the possibility of it breaking.  As I stated earlier one pin usually isn't worth the problems.

i have 1 bent pin left corner of my USB 3.0 on my case what should i do about that? i can live with out it but its kinda annoying needing to use 2.0 or the back of the mother board

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/
Share on other sites

Link to post
Share on other sites

1 minute ago, DominicNikon said:

i have 1 bent pin left corner of my USB 3.0 on my case what should i do about that? i can live with out it but its kinda annoying needing to use 2.0 or the back of the mother board

Only thing you can do is try to bend it back straight with tweazers or needle nose pliers.    Always a risk of breaking it, but if it isn't working now, you don't got a lot to lose.

Phanteks Enthoo Elite | Intel I9 - 7900X | Asus x299 Rampage VI Extreme | MSI 1080 TI 

32Gb Dominator Platinum Special Edition Blackout 3200MHz  | Samsung 960 Pro | 2x Samsung 961 Pro (Raid 0) 256Gb M.2 SSD  

Samsung 850 Pro 512Gb | WD Black 4TB | Corsair AX1200i

 

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7952903
Share on other sites

Link to post
Share on other sites

Depends on which pin.  Each pin is really important normally, whether it be for power transfer or data transfer.  The bigger problem that you would have is if that bent pin shorts on the outside of the cable, it could cause crashes and other things.

Phanteks Enthoo Elite | Intel I9 - 7900X | Asus x299 Rampage VI Extreme | MSI 1080 TI 

32Gb Dominator Platinum Special Edition Blackout 3200MHz  | Samsung 960 Pro | 2x Samsung 961 Pro (Raid 0) 256Gb M.2 SSD  

Samsung 850 Pro 512Gb | WD Black 4TB | Corsair AX1200i

 

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7952908
Share on other sites

Link to post
Share on other sites

7 hours ago, brighttail said:

I would say probably not, at least not under warranty.  Bent pins, unless it came like that, isn't usually covered.

That being said, ONE pin out of a thousand shouldn't cause much of an issue if any.  Are you having issues?

 

Most repair places can attempt to bend it back but there is always the possibility of it breaking.  As I stated earlier one pin usually isn't worth the problems.

You would be surprised what one messed up pin will do. You can try it but Im gonna bet that the system (if it will boot) will not be the most stable 

The only thing we have to fear is... Stupidity...

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7954113
Share on other sites

Link to post
Share on other sites

7 hours ago, DominicNikon said:

can USB 3.0 work with out a pin?

No. USB requires all of the pins to operate.

 

Make sure your system is off and unplugged then carefully bend the pin back straight. If it wont straighten or breaks off there is always the option to buy a PCI-e USB 3.0 card.

The only thing we have to fear is... Stupidity...

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7954120
Share on other sites

Link to post
Share on other sites

7 hours ago, VulcanAndroid said:

No. USB requires all of the pins to operate.

 

Make sure your system is off and unplugged then carefully bend the pin back straight. If it wont straighten or breaks off there is always the option to buy a PCI-e USB 3.0 card.

can a usb 3.0 pci card have usb 3.0 in the front of the case?

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7955981
Share on other sites

Link to post
Share on other sites

1 hour ago, DominicNikon said:

can a usb 3.0 pci card have usb 3.0 in the front of the case?

I believe there are some that have pin-outs to connect front USB ports.

 

Here is one off Newegg for under $20

 

http://www.newegg.com/Product/Product.aspx?Item=N82E16816322013&nm_mc=KNC-GoogleAdwords-PC&cm_mmc=KNC-GoogleAdwords-PC-_-pla-_-Hard+Drive+Controllers+%2F+RAID+Cards-_-N82E16816322013&gclid=CjwKEAjwtLO7BRDax4-I4_6G71USJAA6FjN1X_vYbqosA28eZ3zxlzNNy_pOV0cLTvM-vFNVUO3zKBoCxbjw_wcB&gclsrc=aw.ds

The only thing we have to fear is... Stupidity...

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7956232
Share on other sites

Link to post
Share on other sites

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7956710
Share on other sites

Link to post
Share on other sites

18 hours ago, DominicNikon said:

i have 1 bent pin left corner of my USB 3.0 on my case what should i do about that? i can live with out it but its kinda annoying needing to use 2.0 or the back of the mother board

 

What do you mean "on my case" ??? Do you mean you have a bend USB 3 pin on the motherboard?

 

If so, try to bend it back, if it break then it's only gonna mean you'll have 1 working USB 3 port instead of 2, the USB 3 header always is for 2 ports. So at worst you'll only have 1 port.

 

EDIT: also please start your own threads instead of hijacking someone else thread.

If you need help with your forum account, please use the Forum Support form !

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7956820
Share on other sites

Link to post
Share on other sites

32 minutes ago, wkdpaul said:

 

What do you mean "on my case" ??? Do you mean you have a bend USB 3 pin on the motherboard?

 

If so, try to bend it back, if it break then it's only gonna mean you'll have 1 working USB 3 port instead of 2, the USB 3 header always is for 2 ports. So at worst you'll only have 1 port.

 

EDIT: also please start your own threads instead of hijacking someone else thread.

the pins on the motherboard for the cases io

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7956959
Share on other sites

Link to post
Share on other sites

14 minutes ago, DominicNikon said:

the pins on the motherboard for the cases io

then like I said, it should be fine ... try bending it back and if it breaks you'll still have one USB port that will work, better than nothing.

If you need help with your forum account, please use the Forum Support form !

Link to comment
https://linustechtips.com/topic/616050-bent-usb3-pin/#findComment-7957014
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×