NZXT H440

[CJ5579]

I am planning on getting a black/red h440 and doing a custom liquid cooling loop in it. I plan on having a 360 in the front and a 240 on top. I do not know how much clearance I have on radiator thickness, especially the front one since I will have a HDD in the bottom mount (in the basement) Also any recommendations on a pump and reservoir for a loop that will eventually have 3 graphics cards. (What's the best way to configure the graphics card flow layout, parallel or out of one and into the next?)

 

I do plan on using as much stuff from EKWB as possible to keep it all from one company.

 

If there are recommendations for a better case for this kind of a loop, let me know and I will check it out. (If there are 5.25" bays, I like them to be behind a door, like the Phantom 410, but if it is necessary, I will get one with exposed 5.25" bays.)

 

Loop Plans:

Starting with the Reservoir it will go into the pump which in turn goes to the CPU block and then into the 240mm radiator, and then into the mosfet block (if built into the board) and then to the graphics cards, and finally into the 360mm radiator feeding back into the Reservoir. Hopefully that train of thought could be followed.

[DXMember]