Jump to content

Hello all,

 

I have a decent computer with an i7 5930k, Titan X in SLI, and 32gbs of RAM. I have been getting very below par scores in 3D mark. In firestrike Ultra I am getting 5600 or so. In comparison to other people with the same rig. I recently downloaded GPU-Z to see what the problem might be. Here are the details:

My GPU load is 98-99 percent so it seems fine. 

MY Power Consumption TDP would sometimes hit 88-90 percent. I have an 850watt power supply by corsair. That seemed odd to me.

the Bus interface load would never change by much.

Under the PerfCap Reason: During the most intensive tests it would always say SLI. I don't know what that means. It also said Util and Pwr at one point. 

Temps ranged from 73C-85C. I really want to get my computer to be able to perform like similar computers of this type. 

 

Thanks for any help!

Brent

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/
Share on other sites

Link to post
Share on other sites

Hello all,

 

I have a decent computer with an i7 5930k, Titan X in SLI, and 32gbs of RAM. I have been getting very below par scores in 3D mark. In firestrike Ultra I am getting 5600 or so. In comparison to other people with the same rig. I recently downloaded GPU-Z to see what the problem might be. Here are the details:

My GPU load is 98-99 percent so it seems fine. 

MY Power Consumption TDP would sometimes hit 88-90 percent. I have an 850watt power supply by corsair. That seemed odd to me.

the Bus interface load would never change by much.

Under the PerfCap Reason: During the most intensive tests it would always say SLI. I don't know what that means. It also said Util and Pwr at one point. 

Temps ranged from 73C-85C. I really want to get my computer to be able to perform like similar computers of this type. 

 

Thanks for any help!

Brent

 

sli means its limited by sli i get it on my 970 but im on the edge of what my cards are meant to do . do a fresh install of windows then run firestrike if the scores go up its crap on on pc . also is the benchmark installed on a ssd if not put it on one scores may go up with that change . also run everything stock speeds then with a oc if you have one if both are the same score or close then you got a problem . its either your got bad hardware or if your OC,ing then its a bad OC (too high ). have gpu z and msi afterburner or evga alt along with something to graph your cpu temps and loads intel extreme utility  is what i use .  and link your benchmark pls from 3dmark

main rig

Spoiler

 corsair 750d | evga 1000w g2 | Gigabyte x99 soc champ | 5820k 4.0GHz | 1tb wd blue | 250gb samsung 840 evo  | Crucial Ballistix Sport XT 16GB 8x2 DDR4-2400 | MSI GTX 970 x2 | monitor Acer B286HK 28" 4K | razor chroma blackwidow  | razor death adder chroma

CENTOS 7 SERVER (PLEX&docker stuff)

Spoiler

NZXT s220 | evga 500w 80+ | AMD FX 8320e | ASUS M5A78L-M/USB3 | 2x8gb non ecc ddr3 WD red 2TBx2 | seagate 160gb microcenter 8gb flashdrive OS

 

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/#findComment-7589016
Share on other sites

Link to post
Share on other sites

OC your cpu try that at around 4.3-4.5ghz

get it stable then do your gpu's  then run it again full set of tests

 

looks like other people have OC's in one form or another

 

http://www.3dmark.com/fs/7173187

thats mine at near stock and im beating you with a 6core and 970's

 

 

main rig

Spoiler

 corsair 750d | evga 1000w g2 | Gigabyte x99 soc champ | 5820k 4.0GHz | 1tb wd blue | 250gb samsung 840 evo  | Crucial Ballistix Sport XT 16GB 8x2 DDR4-2400 | MSI GTX 970 x2 | monitor Acer B286HK 28" 4K | razor chroma blackwidow  | razor death adder chroma

CENTOS 7 SERVER (PLEX&docker stuff)

Spoiler

NZXT s220 | evga 500w 80+ | AMD FX 8320e | ASUS M5A78L-M/USB3 | 2x8gb non ecc ddr3 WD red 2TBx2 | seagate 160gb microcenter 8gb flashdrive OS

 

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/#findComment-7589114
Share on other sites

Link to post
Share on other sites

no thats with just the boost on the cards my cpu is at 4.4ghz 5820k .

 

this may sound bad are they really titan x's not just someone who bios hacked the cards and thur on a titan x cooler. like a 770 or 780 pcb

main rig

Spoiler

 corsair 750d | evga 1000w g2 | Gigabyte x99 soc champ | 5820k 4.0GHz | 1tb wd blue | 250gb samsung 840 evo  | Crucial Ballistix Sport XT 16GB 8x2 DDR4-2400 | MSI GTX 970 x2 | monitor Acer B286HK 28" 4K | razor chroma blackwidow  | razor death adder chroma

CENTOS 7 SERVER (PLEX&docker stuff)

Spoiler

NZXT s220 | evga 500w 80+ | AMD FX 8320e | ASUS M5A78L-M/USB3 | 2x8gb non ecc ddr3 WD red 2TBx2 | seagate 160gb microcenter 8gb flashdrive OS

 

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/#findComment-7589121
Share on other sites

Link to post
Share on other sites

39 minutes ago, Bhstrumpet18 said:

did you overclock your GPUs? It doesn't make sense that my TItan X's are performing so low.

it does seem strange. is SLI enabled? That looks like a single Titan X score 

Current PC: Origin Millennium- i7 5820K @4.0GHz | GTX 980Ti SLI | X99 Deluxe 

 

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/#findComment-7589222
Share on other sites

Link to post
Share on other sites

sli is on thats what has me thinking they arnt real titans   its listed on the 3dmark report

18 minutes ago, afyeung said:

it does seem strange. is SLI enabled? That looks like a single Titan X score 

@Bhstrumpet18 when you see this screen shot both gpu-z windows side by side with each card info  bios version ,bus id ect the main screen of the tool . also make sure you set the second gpu-z to the second card

main rig

Spoiler

 corsair 750d | evga 1000w g2 | Gigabyte x99 soc champ | 5820k 4.0GHz | 1tb wd blue | 250gb samsung 840 evo  | Crucial Ballistix Sport XT 16GB 8x2 DDR4-2400 | MSI GTX 970 x2 | monitor Acer B286HK 28" 4K | razor chroma blackwidow  | razor death adder chroma

CENTOS 7 SERVER (PLEX&docker stuff)

Spoiler

NZXT s220 | evga 500w 80+ | AMD FX 8320e | ASUS M5A78L-M/USB3 | 2x8gb non ecc ddr3 WD red 2TBx2 | seagate 160gb microcenter 8gb flashdrive OS

 

Link to comment
https://linustechtips.com/topic/581077-titan-x-sli-problem/#findComment-7589265
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×