Black Widow

[dubdub]

I have been planning this build for many months waiting for parts to be released as I went on. I'm finally finished the main aspects but some other editions will be added in the coming months.

Parts list :
Case: Corsair 760t graphite edition w/b
Motherboard: Msi x99 Krait edition
Power supply: Evga platinum 1200 Watt
Sleeving: Evga custom sleeving kit

Ram: Crucial Ballistics Sport 2400 x16gig
Cpu: Intel i7 5820k 6 core processor
Ssd: Samsung 850 Evo 500gig

Hd: Hitachi 2Tb 7200 rpm

Hd: Seagate 4Tb 5900 rpm surveillance drive 
Gpu: Galax 980 hof edition
Disc drive: lg 24x dvd burner

Lighting: Darkside rgb 2ft strips 

Lighting: Aled rgb 2 x 5 meter

H20 LIST:
Pump: Ek ddc 300mm pump res combo
Cpu block: Ek Evo Supremacy full nickle
Rads: Alphacool NexXxos Ut60 240mm and Alphacool NexXxos ut60 360mm
Fittings: Bitspower straight compression fittings x 12, 6 g 1/4 bitspower plugs, bitspower g 1/4 fill and drain port, 2 bitspower 15mm extenders
Gpu block: Diamond cooling full nickle
custom water block
Tubing: primochill, primoflex 3/8 X 5/8 Elegant White tubing
Fans: 6 x aerocool 120mm dead silence
Fluid: Ek coolant 4 x 1 liters

Keyboards: Corsair k95 rgb keyboard
Mouse: Razer Naga Epic
Mouse Pad: corsair MM3300

Webcam: Logitech C920
Headset: Astro A40s
Desk: Tokyo by structube
Headset rest: Brainwaves acrylic rest
Speakers: edifier Luna eclipse 2.0 
Monitor: Viewsonic 27inch 4ms response 60hz

Monitor: Lg 29" widescreen 2560x1080

Shelf unit: 32" x 12" big boy

On order and in possession:
Monitor: Acer xb270hu 1440p gsync ips 144hz
Gpu: Galax 980gtx
Gpu block: Diamond cooling full nickle custom block
Fans: noctua f12 for front case 
Ssd: Samsung 850 Evo 1tb

Chair: dx racer black and white or lazy boy executive chair.

 

This is a White and black Theme build as shown below. Would like to know what everyone thinks of this build and if any changes would  help the appearance and performance of this build? The below transitions from aio cooler to H20 custom water loop. More pictures will be added in the near future of the setup process. 


This was a fun build, I have never built a custom loop water system before. I was very nervous about going down this road but came to find out how simple this was. There was a few hiccups along the way but nothing major..
Thanks to everyone on Linus tech tips for helping me out. I will post more as the products arrive.. If you have any questions I will be glad to answer them and would love to hear what u think of my build.

 

 

[SamTheWelshDragon]

There's a pinned thread for showing off your setup on General Discussion.

 

 

[dubdub]

Yes I wanted to start a new thread because a lot has changed..  Not sure why that's is there unless I messed up 

9 minutes ago, SamTheWelshDragon said:

There's a pinned thread for showing off your setup on General Discussion.

 

 

 

[dubdub]

2 minutes ago, dubdub said:

Yes I wanted to start a new thread because a lot has changed..  Not sure why that's is there unless I messed up 

 Or do u mean post it there instead? 

[dubdub]

22 minutes ago, SamTheWelshDragon said:

There's a pinned thread for showing off your setup on General Discussion.

 

 

How do I post in that thread or do u just reply in there?  I can pin a thread on the general discussion page 

[Rck010]

Nice setup but what is that bend down there at the front radiator? If it really is the bend it looks like, i highly recommend draining your loop and finding another solution for that part. That does not look good and it hurts the cooling capacity a lot. The one on the inlet port on your reservoir looks too long as well to me, you want your tubing as short as possible.

 

Sounds negative but don't take it the offensive way, i do think you made a great looking build. But in my opinion you should really look into those two things.