Help making loop

[TubsAlwaysWins]

Ok so i don't know to much about watercooling. I am looking for a loop for this build: http://pcpartpicker.com/p/shnWVn

and need some help picking the parts for it. I am looking for a full loop with as many radiators as I can get for as little as I can get (but i can figure out money later), while it still looks nice. (don't want a poo brown loop)

 

I also have a question: Does it make a difference if you run the res>pump>gpu>cpu>radiators>res for CPU temps significantly? or should you go res>pump>cpu>gpu>radiators>res?

[BurstSMG]

Found this on overclock.net

Hopefully it helps you out

 

http://www.overclock.net/t/913181/water-cooling-guide-for-noobs-always-updated

 

I've read it, it seems very in-depth and you should like it

[TubsAlwaysWins]

Just now, ZillaGames said:

Found this on overclock.net

Hopefully it helps you out

 

http://www.overclock.net/t/913181/water-cooling-guide-for-noobs-always-updated

 

I've read it, it seems very in-depth and you should like it

Ok thanks ill check it out

[BurstSMG]

1 minute ago, TubsAlwaysWIns said:

Ok thanks ill check it out

No problem

[BurstSMG]

1 minute ago, TubsAlwaysWIns said:

Ok thanks ill check it out

Just a tip from me, use Arctic MX-4 if you want to use a water loop.

[TubsAlwaysWins]

Just now, ZillaGames said:

Just a tip from me, use Arctic MX-4 if you want to use a water loop.

OK thats probably what I would do since water is cheap

[BurstSMG]

Just now, TubsAlwaysWIns said:

OK thats probably what I would do since water is cheap

 Sounds good. I'll head off then. Good luck with your endeavors

[TubsAlwaysWins]

Just now, ZillaGames said:

 Sounds good. I'll head off then. Good luck with your endeavors

Thanks

[W-L]

23 minutes ago, TubsAlwaysWIns said:

Ok so i don't know to much about watercooling. I am looking for a loop for this build: http://pcpartpicker.com/p/shnWVn

and need some help picking the parts for it. I am looking for a full loop with as many radiators as I can get for as little as I can get (but i can figure out money later), while it still looks nice. (don't want a poo brown loop)

I also have a question: Does it make a difference if you run the res>pump>gpu>cpu>radiators>res for CPU temps significantly? or should you go res>pump>cpu>gpu>radiators>res?

Loop order doesn't matter as long as your res is above and just before the pump to ensure it doesn't run dry, for GPU blocks and things EKWB is your best bet, their cooling configurator can help you find the block that is needed:

https://www.ekwb.com/configurator/

[TubsAlwaysWins]

1 minute ago, W-L said:

Loop order doesn't matter as long as your res is above and just before the pump to ensure it doesn't run dry, for GPU blocks and things EKWB is your best bet, their cooling configurator can help you find the block that is needed:

https://www.ekwb.com/configurator/

Ok thanks. Ill post links to things on here in a bit so you can approve