i really need some help

[epicisthefun]

i just built my first pc with some friends who have a lot more experience than i do. i used the nzxt kraken x61 as a cooler for my pc and its obviously pumping but with every boot into bios  my cpu temp goes way up  at first we checked plugging in the usb connector to the mother board an on startup everything just went down like completely shut off so we unplugged  that 

it booted again and the temps went straight up  the only thing we haven't done is checked the connection to the thermal paste because were pretty sure thats not our problem.

 

PLEASE HELP weve been trouble shooting for around a half hour

[dragoon20005]

what temp are you getting?

 

 

[Zodiark1593]

We need information on the system, cooler, processor, case, temperature readings, and perhaps even a picture of the wiring would be a great help too.

[jcw150]

check the thermal pasta pls

[epicisthefun]

31 minutes ago, dragoon20005 said:

what temp are you getting? upwards of 80 c so were just turning it off

 

 

 

[epicisthefun]

19 minutes ago, jcw150 said:

check the thermal pasta pls

we did doesnt seem to be it

[dragoon20005]

Just now, epicisthefun said:

 

does it continue to go up?

 

Intel CPU can go up to 100 degrees before it shut down

 

use the stock cooler and see what temps you are getting

[epicisthefun]

SO OP HERE MY PROBLEM IS FIXXED I DIDDNT PLUG THE 3 PIN CONNECTOR TO THE CPU FAN HEADER NOW ITS FIXXED 

[epicisthefun]

Just now, dragoon20005 said:

does it continue to go up?

 

Intel CPU can go up to 100 degrees before it shut down

 

use the stock cooler and see what temps you are getting

my cpu diddnt come with a stock cooler but i did just fix my problem