Jump to content

My MSI motherboard says "usb overload shutting down after 15 seconds to protect mainboard" (even after fron pannel usbs are disconnected). I was wondering if this could be an issue with the way I wired the pc (if so where might the issue be)? Finally could it be that my power supply (250W) is not powerful enough?

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/
Share on other sites

Link to post
Share on other sites

there might be a short in one of your peripherals. also, a 250 watter is probably not sufficient, but it would depend on your system specs.

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166360
Share on other sites

Link to post
Share on other sites

Just now, Paul_VB said:

there might be a short in one of your peripherals. also, a 250 watter is probably not sufficient, but it would depend on your system specs.

The pc is stock from IBUYPOWER it worked before but after I rewired it it won't work

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166374
Share on other sites

Link to post
Share on other sites

Aforementioned power supply doesn't seem too powerful, although it should be alright, it could still be causing the problem.

 

Something could be wrong with your components. I built a PC for a friend, GPU was DOA and was receiving the same error context. 

 

Hope we you get this resolved! 

 

- Coos

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166377
Share on other sites

Link to post
Share on other sites

Just now, Coos724 said:

Aforementioned power supply doesn't seem too powerful, although it should be alright, it could still be causing the problem.

 

Something could be wrong with your components. I built a PC for a friend, GPU was DOA and was receiving the same error context. 

 

Hope we you get this resolved! 

 

- Coos

Ok thanks, the pc is about 1 y/o and worked up until I rewired it I then put plugs in all the usb ports and unplugged the front pannel usb but I wanted to know If I could have wired it wrong to cause this 

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166396
Share on other sites

Link to post
Share on other sites

2 minutes ago, VoyexTech said:

Ok thanks, the pc is about 1 y/o and worked up until I rewired it I then put plugs in all the usb ports and unplugged the front pannel usb but I wanted to know If I could have wired it wrong to cause this 

It is a possibility that there's a wiring issue. double check for any pinched wires, and unplug everything from the USB ports and headers

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166407
Share on other sites

Link to post
Share on other sites

3 minutes ago, Coos724 said:

Aforementioned power supply doesn't seem too powerful, although it should be alright, it could still be causing the problem.

 

Something could be wrong with your components. I built a PC for a friend, GPU was DOA and was receiving the same error context. 

 

Hope we you get this resolved! 

 

- Coos

Wait the gpu was dead and causing this error?! Could I unplug the gpu and test for this issue somehow because I am looking at moving from the AMD R7 250X to the Nvidia GTX 960 with a new powe supply of course 

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166414
Share on other sites

Link to post
Share on other sites

Just now, VoyexTech said:

Ok thanks, the pc is about 1 y/o and worked up until I rewired it I then put plugs in all the usb ports and unplugged the front pannel usb but I wanted to know If I could have wired it wrong to cause this 

Sure man! Let me know if you get it resolved soon. If it doesn't work I could gladly hop on skype, or phone whatever works man. Probably just a silly wiring mistake you made somewhere, no biggie!

 

- Coos

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166415
Share on other sites

Link to post
Share on other sites

1 minute ago, Paul_VB said:

It is a possibility that there's a wiring issue. double check for any pinched wires, and unplug everything from the USB ports and headers

Already did that 3 times is there any wires I could have not plugged in or do the usbs run off the main motherboard plug in 

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166426
Share on other sites

Link to post
Share on other sites

1 minute ago, VoyexTech said:

Already did that 3 times is there any wires I could have not plugged in or do the usbs run off the main motherboard plug in 

if by main motherboard plug in, you mean the 24pin, then i belive so. Also, when you rewired the pc, did you run any wires directly behind the mobo?

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166438
Share on other sites

Link to post
Share on other sites

1 minute ago, Coos724 said:

Sure man! Let me know if you get it resolved soon. If it doesn't work I could gladly hop on skype, or phone whatever works man. Probably just a silly wiring mistake you made somewhere, no biggie!

 

- Coos

OK thanks I will look on the Internet for how to wire the stuff I think I did it right but knowing me my thought is probably wrong if I can't get it working I might call you on skype later mine is: "epicpotatogamer"

It will have the skyrim symbol

 

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166466
Share on other sites

Link to post
Share on other sites

6 minutes ago, Paul_VB said:

if by main motherboard plug in, you mean the 24pin, then i belive so. Also, when you rewired the pc, did you run any wires directly behind the mobo?

No I put them all in the cable management area in the back of the case

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166491
Share on other sites

Link to post
Share on other sites

seeing as the issue only occurred after you rewired, i'm fairly certain it is a wiring problem. try dicoonecting evey cable except for the 24pin, cpu 8pin, power button header, and viceo out. see if you get the same error

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166531
Share on other sites

Link to post
Share on other sites

Ik this is unrelated but if I was to upgradeto a  Nvidia GTX 960 or 970 and an Intel i7 quad-core what kind of power supply would I need?

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166532
Share on other sites

Link to post
Share on other sites

Just now, Paul_VB said:

seeing as the issue only occurred after you rewired, i'm fairly certain it is a wiring problem. try dicoonecting evey cable except for the 24pin, cpu 8pin, power button header, and viceo out. see if you get the same error

Even the hdds, ssd and graphics card?

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166548
Share on other sites

Link to post
Share on other sites

1 minute ago, VoyexTech said:

Ik this is unrelated but if I was to upgradeto a  Nvidia GTX 960 or 970 and an Intel i7 quad-core what kind of power supply would I need?

i'd say a 500 watt should be fine for an i7 + 970

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166559
Share on other sites

Link to post
Share on other sites

Just now, Paul_VB said:

i'd say a 500 watt should be fine for an i7 + 970

OK thanks!

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166566
Share on other sites

Link to post
Share on other sites

1 minute ago, VoyexTech said:

Even the hdds, ssd and graphics card?

unplug all drives, just to be certain

 

if you dont have onboard video out, then yes to the gpu. 

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166573
Share on other sites

Link to post
Share on other sites

2 minutes ago, Paul_VB said:

unplug all drives, just to be certain

 

if you dont have onboard video out, then yes to the gpu. 

I do have onboard hdmi so I'll do that either way I'll know if it doesn't shut off in a few minuets but is there also the possibility of pcie slot failure?

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166597
Share on other sites

Link to post
Share on other sites

1 minute ago, VoyexTech said:

I do have onboard hdmi so I'll do that either way I'll know if it doesn't shut off in a few minuets but is there also the possibility of pcie slot failure?

it sounds unlikely that the pcie slot could be causing a USB error. im 95% sure its an issue with an electrical short with a wire somewhere

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166615
Share on other sites

Link to post
Share on other sites

Ok I'll try it if it is the gpu no big deal I was getting one anyways. If it's the mobo I didn't want to replace that so it'll be $100 extra I don't need to spend

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166643
Share on other sites

Link to post
Share on other sites

3 minutes ago, Paul_VB said:

it sounds unlikely that the pcie slot could be causing a USB error. im 95% sure its an issue with an electrical short with a wire somewhere

OK thanks I'll try that when I get home in 30min I'll be leaving for home soon is there anyway I can contact you then About that or should I just post on this thread?

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166660
Share on other sites

Link to post
Share on other sites

2 minutes ago, VoyexTech said:

Ok I'll try it if it is the gpu no big deal I was getting one anyways. If it's the mobo I didn't want to replace that so it'll be $100 extra I don't need to spend

most motherboard have a 3 year warranty. i saw you said the machine is a little over 1 year old, so you should be safe (unless Ibuypower has a shitty warranty)

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166666
Share on other sites

Link to post
Share on other sites

2 minutes ago, VoyexTech said:

OK thanks I'll try that when I get home in 30min I'll be leaving for home soon is there anyway I can contact you then About that or should I just post on this thread?

this thread is a decent place. If the issue persists, i can help you via skype

CPU: AMD FX8350 @4.4GHz | MOBO: ASUS Sabertooth 990FX R2.0, 990FX chipset | RAM: 16GB (4x4) dual channel Patriot Xtreme series DDR3 @1866MHz @1.65V | GPU: Asus Radeon R9 Fury Strix| PSU: Corsair AX860i 860 watt | CPU cooling: Noctua NH-D15S + additional Noctua NF-F12 | Case:Corsair C70 Black | Storage: 3x 128GB Samsung 840 pro SSDs; 1 for the OS, 2 in RAID 0 for games. 3x WD Red 3TB HDDs in raid 5 for bulk storage | Displays: 1x Dell 3007WFP 30 inch 2560x1600 IPS LCD. 1x I-Inc IH253DPB 25 inch 1920x1080 TN LCD | Keyboard: Corsair K70 with Cherry MX brown switches + Blue LED backlight | Headphones: Sennheiser HD 280 Pro | Mouse: Logitech G600 @1100 DPI | OS: Win 10 Pro 64 bit | 

Mfg/model number: Clevo/W355SSQ | CPU: Intel i7 4710MQ @3.5GHz  | MOBO: W35xSS_370SS, HM87 Chipset | RAM: 16GB (2x8) dual channel Crucial Ballistix DDR3 @1866MHz | GPU: GTX860m 2GB Gddr5 | Battery: 76,960mW/h 8 Cell battery, 3 Hrs full on a full charge | Storage: 1x 128GB Samsung 840 pro SSD for the OS. 1x WD Red 1TB HDD For storage and games | Displays: 1x 15.6" 1080p LCD | Keyboard: Full 103 key back-lit keyboard | Mouse: Logitech M510 | OS: Win 10 Pro 64 bit |

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166679
Share on other sites

Link to post
Share on other sites

Just now, Paul_VB said:

most motherboard have a 3 year warranty. i saw you said the machine is a little over 1 year old, so you should be safe (unless Ibuypower has a shitty warranty)

OK the problem is I don't have the recipe for the computer I could probably get the online version. But where do I send the mobo IBuyPower or the manufacturer? Cause IBuyPower's warranty is 6 months

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to comment
https://linustechtips.com/topic/541213-usb-overcurrent-issue/#findComment-7166683
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×