Will Push and Pull Work?

[Syralys]

I've been looking into Youtube for this answer and EVERYONE just goes with one method either a push or a pull. So my question is:

 

Will the Push and Pull method work inside this case with this setup? 

 

I'm not 100% sure if it will work since this will be my new 2016 build for my very first Intel Gaming PC. So if anyone who is running with a similar setup that can answer this would be awesome.  I will just put the cooler, motherboard (Just so you know where the heat sinks are),  and case I will be using just for the sake of it. If it can fit on the top of the case. Thank you.

 

FULL SYSTEM SETUP: https://pcpartpicker.com/user/Syralys/saved/#view=Q76J7P

 

CASE: Phanteks Enthoo Pro ATX Full Tower Case

COOLER: NZXT Kraken X61 106.1 CFM Liquid CPU Cooler

MOTHERBOARD: MSI Z170A GAMING M5 ATX LGA1151 Motherboard

[Badazzz]

Yeah of course, it's air, that's really compatible with any case as long as it's not underwater

[Syralys]

Do you think the push pull would fit up at the top even though the heat sinks on the mobo are pretty high?

[Dzzope]

Check out a good review of the case.. should say if it's possible... pretty sure there is one here or over on hardwarecannucks (they do brill case and component reviews)

[EdInk]

10 hours ago, Syralys said:

-SNIP-

Unless you plan to use 12cm thick fans...only push or pull configs will work with the Pro ATX as it's shares a similar chassis as the Luxe which I have.

[Syralys]

4 hours ago, EdInk said:

Unless you plan to use 12cm thick fans...only push or pull configs will work with the Pro ATX as it's shares a similar chassis as the Luxe which I have.

Well that sucks. Oh well I can go looking at other cases. Thanks for the answer EdInk.

[EdInk]

2 hours ago, Syralys said:

Well that sucks. Oh well I can go looking at other cases. Thanks for the answer EdInk.

The Enthoo Luxe suppports push/pull though..it has extra height for additional fans in the top cover lol

[Guest]

Watch this before going push/pull.