Jump to content

Help with cooling...again

soron
By soron
in Cooling
 Share
Posted

Hello,

 

I need you help once again. 

First of all sorry if I created this on the wrong section, but my question is about air and water cooling.

 

Asrock xtreme 4
I7 377K
Asus GTX780
XFX 650 xtr

 

So, I changed house, and during the moving process, I removed my Noctua nh-u14s to avoid uneccesary pression when moving the case around, but there was a bit of an incident when moving the case.

 

To a long story short, but of the side panels of my case dont close correctly and the noctua as a bunch of metal fins broken....

 

I contacted Fractal but they don't ship spare parts to my country, so i have no other choice but to buy a new case and cooler.

 

I've been glancing the phanteks enthoo pro, and thinking of getting a water cooling like the corsair h80i gt, but i've been reading that the pump of AIO coolers makes a lot of noise, but maybe those were just defective units.

 

So my question is, should i get a AIO cooler and wich one would you advised, or should I go with air cooling again? (the nh-u14s was good but it made some pression on my ripjaws rams, so I need something that doens't do that)

 

Also I'm not planning on doing overcloking

 

Thanks in advance (and sorry for bad english, not main language)

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/
Share on other sites
Link to post
Share on other sites
Posted

Hello,

 

I need you help once again. 

First of all sorry if I created this on the wrong section, but my question is about air and water cooling.

 

Asrock xtreme 4
I7 377K
Asus GTX780
XFX 650 xtr

 

So, I changed house, and during the moving process, I removed my Noctua nh-u14s to avoid uneccesary pression when moving the case around, but there was a bit of an incident when moving the case.

 

To a long story short, but of the side panels of my case dont close correctly and the noctua as a bunch of metal fins broken....

 

I contacted Fractal but they don't ship spare parts to my country, so i have no other choice but to buy a new case and cooler.

 

I've been glancing the phanteks enthoo pro, and thinking of getting a water cooling like the corsair h80i gt, but i've been reading that the pump of AIO coolers makes a lot of noise, but maybe those were just defective units.

 

So my question is, should i get a AIO cooler and wich one would you advised, or should I go with air cooling again? (the nh-u14s was good but it made some pression on my ripjaws rams, so I need something that doens't do that)

 

Also I'm not planning on doing overcloking

 

Thanks in advance (and sorry for bad english, not main language)

Is it really unrepairable?

Spoiler

CPU: R7 5800x -- Mobo: Gigabyte B550 Gaming X v2 -- RAM: 2x16GB Kingston Fury Renegade -- GPU: Asrock RX 6800 XT Phantom Gaming OC -- Case: Fractal Design North Walnut/Black Mesh -- Storage: 2TB 970 Evo Plus, 4TB NM790 -- PSU: BeQuiet Pure Power 11 Platinum 650w -- Displays: AOC AGON  AG352UCG, Dell Ultrasharp U2715H -- Cooling: Noctua NH-D14 -- Mouse: Corsair M65 -- Keyboard: Func KB 460 MX Blue -- Sound: Motu M2 -> THX 789 -> DT880 600Ω -- Mic: RØDE NT1-A

Spoiler

RIG 2: Intel i5-8400, 16 GB RAM, RTX 2070S

Spoiler

Sig Image

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7072939
Share on other sites
Link to post
Share on other sites
Posted

Hello,

 

I need you help once again. 

First of all sorry if I created this on the wrong section, but my question is about air and water cooling.

 

Asrock xtreme 4
I7 377K
Asus GTX780
XFX 650 xtr

 

So, I changed house, and during the moving process, I removed my Noctua nh-u14s to avoid uneccesary pression when moving the case around, but there was a bit of an incident when moving the case.

 

To a long story short, but of the side panels of my case dont close correctly and the noctua as a bunch of metal fins broken....

 

I contacted Fractal but they don't ship spare parts to my country, so i have no other choice but to buy a new case and cooler.

 

I've been glancing the phanteks enthoo pro, and thinking of getting a water cooling like the corsair h80i gt, but i've been reading that the pump of AIO coolers makes a lot of noise, but maybe those were just defective units.

 

So my question is, should i get a AIO cooler and wich one would you advised, or should I go with air cooling again? (the nh-u14s was good but it made some pression on my ripjaws rams, so I need something that doens't do that)

 

Also I'm not planning on doing overcloking

 

Thanks in advance (and sorry for bad english, not main language)

I'm guessing you had a MidTower case so this might be of some interest to you. The Enthoo Pro M with acrylic full sized side panel.

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7073047
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I'm guessing you had a MidTower case so this might be of some interest to you. The Enthoo Pro M with acrylic full sized side panel.

 

What are the diferences between that and the Pro?

 

Is it really unrepairable?

 

Yes sadly. I tried everything but both panels are broken for good...

 

120mm AiOs aren't worth it. Even some 240mm AiOs are outperformed by the NH-D15 xD

 

But would it fit well it mine ripjaws?

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7074106
Share on other sites
Link to post
Share on other sites
Posted

What are the diferences between that and the Pro?

 

 

Yes sadly. I tried everything but both panels are broken for good...

 

 

But would it fit well it mine ripjaws?

Lucky noctua really thought about that one they made a cut-out for extra tall memory sticks so u should be able to run the D15 with the rip jaws. although I don't know if u can have the front fan installed at the same time

Spoiler

CPU: R7 5800x -- Mobo: Gigabyte B550 Gaming X v2 -- RAM: 2x16GB Kingston Fury Renegade -- GPU: Asrock RX 6800 XT Phantom Gaming OC -- Case: Fractal Design North Walnut/Black Mesh -- Storage: 2TB 970 Evo Plus, 4TB NM790 -- PSU: BeQuiet Pure Power 11 Platinum 650w -- Displays: AOC AGON  AG352UCG, Dell Ultrasharp U2715H -- Cooling: Noctua NH-D14 -- Mouse: Corsair M65 -- Keyboard: Func KB 460 MX Blue -- Sound: Motu M2 -> THX 789 -> DT880 600Ω -- Mic: RØDE NT1-A

Spoiler

RIG 2: Intel i5-8400, 16 GB RAM, RTX 2070S

Spoiler

Sig Image

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7074125
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Lucky noctua really thought about that one they made a cut-out for extra tall memory sticks so u should be able to run the D15 with the rip jaws. although I don't know if u can have the front fan installed at the same time

 

Well luckily the fan from the U14S is still in good shape, so I can just buy nh-d15s (it only brings one fan so its cheaper) and then try it out

 

Size

 

Pro M Acrylic  - 235 x 480 x  500mm - mid size tower ( with full window panel)

Pro - 235 x 535 x 550 mm - full tower ( split window design)

 

The Pro Acrylic is also a bit cheaper, so i might actually go to that one

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7074322
Share on other sites
Link to post
Share on other sites
Posted

Well luckily the fan from the U14S is still in good shape, so I can just buy nh-d15s (it only brings one fan so its cheaper) and then try it out

That would be a very good option 

Spoiler

CPU: R7 5800x -- Mobo: Gigabyte B550 Gaming X v2 -- RAM: 2x16GB Kingston Fury Renegade -- GPU: Asrock RX 6800 XT Phantom Gaming OC -- Case: Fractal Design North Walnut/Black Mesh -- Storage: 2TB 970 Evo Plus, 4TB NM790 -- PSU: BeQuiet Pure Power 11 Platinum 650w -- Displays: AOC AGON  AG352UCG, Dell Ultrasharp U2715H -- Cooling: Noctua NH-D14 -- Mouse: Corsair M65 -- Keyboard: Func KB 460 MX Blue -- Sound: Motu M2 -> THX 789 -> DT880 600Ω -- Mic: RØDE NT1-A

Spoiler

RIG 2: Intel i5-8400, 16 GB RAM, RTX 2070S

Spoiler

Sig Image

Link to comment
https://linustechtips.com/topic/532912-help-with-coolingagain/#findComment-7074338
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×