Jump to content

CM Hyper TX3 EVO or Hyper 103

Mrafidrahman
Go to solution Solved by WoodenMarker,

The 212x fits in the case despite advertised specs. The specs for the case are conservative when it comes to the cooler and the 212x has been installed in the case many times before.

Out of the two mentioned, the 103 is better.

Hello everyone.. how r u all doing?... im going to buy cpu air cooler and thought before i move forward i take some advice from you...

For performance basis Coolermaster Hyper TX3 EVO (http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-tx3-evo/) or Coolermaster Hyper 103 (http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-103/) which will be better?

 

Another thing is im using Corsair Carbide Spec 03 casing. In its official page and manual book it said that this casing can hold cpu cooler maximum 157mm height UnNDOS9.jpg.

On the other hand Coolermaster Hyper 212X which height is more than this casing can support gWV9aXI.jpg.

But the difference is very small. So can my casing hold Hyper 212X? If it can then should i go with 212X or TX3 or 103?

 

Thank you all in advance for your opinion and advice.

Link to comment
Share on other sites

Link to post
Share on other sites

I don't know about the hyper 103, but the my buddy has the TX3 and he has broken the mounting bracket many times and had to swap all of the pieces from the intel stock heatsink.

the hyper 103's mounting system doesn't seem as quick to install, but doesn't rely on the stock style mounting system.

Link to comment
Share on other sites

Link to post
Share on other sites

Hello everyone.. how r u all doing?... im going to buy cpu air cooler and thought before i move forward i take some advice from you...

For performance basis Coolermaster Hyper TX3 EVO (http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-tx3-evo/) or Coolermaster Hyper 103 (http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-103/) which will be better?

 

Another thing is im using Corsair Carbide Spec 03 casing. In its official page and manual book it said that this casing can hold cpu cooler maximum 157mm height UnNDOS9.jpg.

On the other hand Coolermaster Hyper 212X which height is more than this casing can support gWV9aXI.jpg.

But the difference is very small. So can my casing hold Hyper 212X? If it can then should i go with 212X or TX3 or 103?

 

Thank you all in advance for your opinion and advice.

if you look to the top right of your original post, you can subscribe to your thread to recieve notifications about posts.

Link to comment
Share on other sites

Link to post
Share on other sites

The 212x fits in the case despite advertised specs. The specs for the case are conservative when it comes to the cooler and the 212x has been installed in the case many times before.

Out of the two mentioned, the 103 is better.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×