Jump to content

I am trying to get my best firestrike score and I have overclocked my two GTX 970's before, but now it is not boosting at all with my first card at stock core clocks and my second at about half the stock core clocks. I attacked a screenshot of my firestrike showing the core clocks and my precision x settings, I had been messing around trying different things so this is just default with the core clock and memory clock boosted to about where I would want it. any help would be awesome, thanks everyone.

 

Image: http://imgur.com/rlH9jnq

Link to comment
https://linustechtips.com/topic/532689-gpu-boost-acting-up/
Share on other sites

Link to post
Share on other sites

What are your temps hitting? GPU Boost shouldn't throttle due to temperature until the mid to high 60c's.

And since it's a benchmark providing 100% load, your clocks and voltages should remain maxed regardless of GPU Boosts state (again unless you're hitting temp limits)

 

Regardless, you can try enabling K-Boost in EVGA Precision X, it disables GPU Boost. The only other way to disable it is with a BIOS edit and flash.

Link to comment
https://linustechtips.com/topic/532689-gpu-boost-acting-up/#findComment-7070315
Share on other sites

Link to post
Share on other sites

My temps in the picture are 52 and 43 so im not sure what is going on.

Those are unbelievably low for a 3DMark stress test... those are almost idle temps, the 43c anyway.

You're already using Precision X, so I'd suggest enabling K-Boost which effectively locks your voltage and clocks at their maximum while it's enabled.

Link to comment
https://linustechtips.com/topic/532689-gpu-boost-acting-up/#findComment-7070371
Share on other sites

Link to post
Share on other sites

I am trying to get my best firestrike score and I have overclocked my two GTX 970's before, but now it is not boosting at all with my first card at stock core clocks and my second at about half the stock core clocks. I attacked a screenshot of my firestrike showing the core clocks and my precision x settings, I had been messing around trying different things so this is just default with the core clock and memory clock boosted to about where I would want it. any help would be awesome, thanks everyone.

 

Image: http://imgur.com/rlH9jnq

The reason why your temps are so low is because your 1st GPU is clocking around 25% lower than it should while your 2nd GPU is clocking HALF of what it should. That means you're literally getting no performance boost over one card almost. Something's obviously wrong, check your system

Current PC: Origin Millennium- i7 5820K @4.0GHz | GTX 980Ti SLI | X99 Deluxe 

 

Link to comment
https://linustechtips.com/topic/532689-gpu-boost-acting-up/#findComment-7070577
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×