New build error code on motherboard

[MaybeRalph]

Hey guys,

So I just started my new build today and after the first attempt of booting up it seems that Im getting an error code. The error code I am getting on my Motherboard is 55 which from the manual says its a memory initialization error. The PC will boot, and then it will display the error code on the MOBO and then it will restart and repeat the process. 

 

Also, from the Kraken x61 guide, it says to plug in the 3pin power for the pump into the 4pin CPU_Power connector on the board. I'm not sure if Im missing something but where is that? I see CPU_OPT and CPU_FAN.

 

Let me know if anybody needs anymore info.

My build is below

 

PCPartPicker part list / Price breakdown by merchant

 

CPU: Intel Core i5-6600K 3.5GHz Quad-Core Processor  (Purchased For $210.00) 

CPU Cooler: NZXT Kraken X61 106.1 CFM Liquid CPU Cooler  (Purchased For $129.99) 

Motherboard: Gigabyte GA-Z170X-Gaming 5 ATX LGA1151 Motherboard  (Purchased For $149.99) 

Memory: Corsair Vengeance LPX 16GB (2 x 8GB) DDR4-2400 Memory  (Purchased For $84.99) 

Storage: OCZ Vertex 3 120GB 2.5" Solid State Drive  (Purchased For $0.00) 

Storage: Samsung 850 EVO-Series 500GB 2.5" Solid State Drive  (Purchased For $159.99) 

Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive  (Purchased For $0.00) 

Video Card: MSI GeForce GTX 980 Ti 6GB Video Card  (Purchased For $500.00) 

Case: Corsair 780T ATX Full Tower Case  ($149.99 @ Micro Center) 

Power Supply: Corsair 860W 80+ Platinum Certified Fully-Modular ATX Power Supply  (Purchased For $95.00) 

Total: $1479.95

Prices include shipping, taxes, and discounts when available

Generated by PCPartPicker 2016-01-16 14:11 EST-0500

[Djole123]

Try with one stick of RAM at a time if it's a memory problem

For the cooler, plug it into CPU_FAN

[MaybeRalph]

Ok so I took out the RAM and used just one stick, didn't change anything. From what I read about other people having this issue they said that it was CPU related. Should I try and reseat the CPU again? Im 100% sure that there is no bent pins.

[MaybeRalph]

So supposedly since the Skylake Processor can only reach 2133mhz for the ram, thats why Im having the issue and I need to go into the BIOS to change it. Although I can't get into my BIOS to change it since the system just restarts itself and goes into an endless loop. Any suggestions other than just getting new RAM sticks that are 2133mhz? Or is that my only option.