Jump to content

Asus rt-ac68u access problems

2Fast2Foxc
 Share
Posted

Today when I wasn't home the Internet went out and someone rebooted the router and modem. The WiFi is out and when I am plugged in directly I get this message:

Settings have been updated. Web page will now refresh.

Changes have been made to the IP address or port number. You will now be disconnected from RT-AC68U.

To access the settings of RT-AC68U, reconnect to the wireless network and use the updated IP address and port number.

I have tried resetting in multiple ways, multiple times, putting it into firmware recovery mode and I also tried a static IP. I can't even get the led to flash to let me know it reset properly.

All that was done to brick it was turning the power off and back on to cause it to brick.

Any ideas?

Link to comment
https://linustechtips.com/topic/524713-asus-rt-ac68u-access-problems/
Share on other sites
Link to post
Share on other sites
Posted

Today when I wasn't home the Internet went out and someone rebooted the router and modem. The WiFi is out and when I am plugged in directly I get this message:

Settings have been updated. Web page will now refresh.

Changes have been made to the IP address or port number. You will now be disconnected from RT-AC68U.

To access the settings of RT-AC68U, reconnect to the wireless network and use the updated IP address and port number.

I have tried resetting in multiple ways, multiple times, putting it into firmware recovery mode and I also tried a static IP. I can't even get the led to flash to let me know it reset properly.

All that was done to brick it was turning the power off and back on to cause it to brick.

Any ideas?

hold the factory reset button on it till the leds flash or turn off

then wait 5 mins for them to come back

then connect to 192.168.1.1

If you need remote help fixing something on your computer

I can help over Teamviewer if you wish

just msg me on my profile

Link to post
Share on other sites
Posted
  • Author

hold the factory reset button on it till the leds flash or turn off

then wait 5 mins for them to come back

then connect to 192.168.1.1

I already tried that, i have also done the 30 30 30 reset, wps reset and everything in the asus manual.

Link to post
Share on other sites
Posted

I already tried that, i have also done the 30 30 30 reset, wps reset and everything in the asus manual.

then the router is dead

probably got a shock to the system

 

send it to me I'll fix it  :P

If you need remote help fixing something on your computer

I can help over Teamviewer if you wish

just msg me on my profile

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×