Ssd requirement

[UseGoogle]

Is there an ssd requirement? Like for the motherboard?
And what cable do you use

I have no clue about ssd

[Samppa221]

For a 2.5" SSD you use the same SATA connector as normal 3.5" or 2.5" Mechanical Hard Drives uses.

[Octavialicious]

You just need a sata port on your board, and you use a sata data cable (very common, same is used for the HDD)

 

But to take advantage of the SSD, you want at least SATA 2/SATA 3

[ImBleu]

Yes, you are required to have someway of powering the SSD (SATA Power Cable) and a way of access the date (SATA Data Cable).

[FireFox]

Is there an ssd requirement? Like for the motherboard?

And what cable do you use

I have no clue about ssd

 

So long as you have a SATA port you're good to go but make sure you have SATA-III so you can achieve 500MB/s read and writes.

[Clubconsoles]

Is there an ssd requirement? Like for the motherboard?

And what cable do you use

I have no clue about ssd

 

Depends on what type of SSD you are using.

 

This is a example of a SATA SSD:

 

http://www.corsair.com/~/media/Corsair/Product-Photo-Root/S/ssd_f3_angle_240gb.png

 

This is a example of a M.2 SSD:

 

http://www.watercoolinguk.co.uk/images/product_images/large/143/sandisk-x300s-m2-ssd-sata-6g-m2-type-2280-512-gb-sssd-025-55359-1.jpg

 

And this is a PCI express SSD:

 

http://images.anandtech.com/doci/8104/SSD_PCIe_3700_Addin_Card_678x452.jpg

 

If you have a SATA ssd just use a cable you use for 3.5" mechanical HDD's

If you have a PCI express SSD insert it into a empty PCI express slot and screw it in.

If you are using an M.2 ssd make sure your motherboard surports M.2 and also make sure it has the same connector the motherboard uses.

 

Hope this helps.

[UseGoogle]

Chipset:

1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
2. 2 x SATA 3Gb/s connectors (SATA2 2/3) supporting up to 2 SATA 3Gb/s devices

    

   So long as you have a SATA port you're good to go but make sure you have a SATA-III so you can achieve 500MB/s read and writes.

    

[UseGoogle]

You just need a sata port on your board, and you use a sata data cable (very common, same is used for the HDD)

 

But to take advantage of the SSD, you want at least SATA 2/SATA 3

Chipset:

1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
2. 2 x SATA 3Gb/s connectors (SATA2 2/3) supporting up to 2 SATA 3Gb/s devices

[FireFox]

 

Chipset:

1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
2. 2 x SATA 3Gb/s connectors (SATA2 2/3) supporting up to 2 SATA 3Gb/s devices

    

    

 

 

You're good then mate

[UseGoogle]

You're good then mate

Uhm can i see it from the sata? ( the sata gen number?)

[SeanAngelo]

Is there an ssd requirement? Like for the motherboard?

And what cable do you use

I have no clue about ssd

just use the SATA ports on the motherboards, preferably SATA 3