Fx 6300 overclocking

[Marcus Torre DeProspero]

So I have an fx 6300 that I want to overclock but I can never get it past 4.2 ghz I want to get it to 4.5 or a bit more but I can't. It's not a heating issue it just blue screens when I start up my pc. So any ideas?

[The_Stig]

Raise the voltage on the vcore

[QueenDemetria]

So I have an fx 6300 that I want to overclock but I can never get it past 4.2 ghz I want to get it to 4.5 or a bit more but I can't. It's not a heating issue it just blue screens when I start up my pc. So any ideas?

What are your PC specs?

[Marcus Torre DeProspero]

Raise the voltage on the vcore

What to?

[Marcus Torre DeProspero]

What are your PC specs?

Fx-6300 

msi 970a g46

gtx 980 ti g1 gaming 

ax 860i psu

[Belgarathian]

What to?

 

This will depend on the quality of your silicon and it vaires by chip. I'd recommend increasing the vcore voltage by 0.05v and check if it's stable, if it's not increase it another 0.05v. 

[OnekillWalter]

my Fx-6300 is Oc to 4.6ghz with a CM Hyper 212 Evo. mobo is an Asrock 970 Extreme3 R2.0. purrs like a kitten.

 

edit: My bios settings looks like that: 

 

OC Mode : Manual

then another option will appear Overclock mode yadada: manual

my Cpu Frequency : 214

pce : stays at 100

 

spread spectrum : disabled

Cpu active core control : all cores

Amd turbo core: disabled

Amd power management: disabled

 

Multiplier voltage : manual

Cpu multiplier : 21.5 @ 4601mhz

cpu volt @1.4625

 

and leave the rest as it is.

Go to the ADVANCED page and cpu config

disabled everything except: Secure Virtual mode.

[Marcus Torre DeProspero]

my Fx-6300 is Oc to 4.6ghz with a CM Hyper 212 Evo. mobo is an Asrock 970 Extreme3 R2.0. purrs like a kitten.

 

edit: My bios settings looks like that: 

 

OC Mode : Manual

then another option will appear Overclock mode yadada: manual

my Cpu Frequency : 214

pce : stays at 100

 

spread spectrum : disabled

Cpu active core control : all cores

Amd turbo core: disabled

Amd power management: disabled

 

Multiplier voltage : manual

Cpu multiplier : 21.5 @ 4601mhz

cpu volt @1.4625

 

and leave the rest as it is.

Go to the ADVANCED page and cpu config

disabled everything except: Secure Virtual mode.

Thank I will try this

[OnekillWalter]

Thank I will try this

dont forget that those setting works for me, not all chip OC the same. it really is a trial and error process, juggling the CPU frequency, the Cpu Multiplier and the voltage.

 

good luck!

[Marcus Torre DeProspero]

dont forget that those setting works for me, not all chip OC the same. it really is a trial and error process, juggling the CPU frequency, the Cpu Multiplier and the voltage.

 

good luck!

hey looks like its working so far, I am running valley benchmark and no problems

[OnekillWalter]

hey looks like its working so far, I am running valley benchmark and no problems

great! did you Aida64 or Prime95? how are your temperatures?

[Marcus Torre DeProspero]

great! did you Aida64 or Prime95? how are your temperatures?

aida 64 and never went above 58c

[OnekillWalter]

aida 64 and never went above 58c

smooth.