4790k Temps

[Wu_david]

Is this normal??

 

vcore at 1.2v

stock 4790k speed 

cooler master seidon 120v cooler

 

blender renders at 76 degrees max 

[Altecice]

Seems about right for that size of rad imo.

[don_svetlio]

remount it and reapply thermal paste

[GodSpoon]

Doesnt seem bad, maybe a tad hot 

 

Do what don_svetlio said and see how your temps change

[hypnodog]

It's below the max temp of the CPU, so it's fine. Although I think a thermal paste upgrade might help lower the temps a bit.

[W-L]

Is this normal??

vcore at 1.2v

stock 4790k speed 

cooler master seidon 120v cooler

blender renders at 76 degrees max

Those are reasonable temps a bit high but as said in previous posts on this.

[wolfsbane3083]

I'm at 1.19v on a h100i and can hit mid 70s when stressing. Curse Intel and their sloppy thermal paste jobs    

[W-L]

I'm at 1.19v on a h100i and can hit mid 70s when stressing. Curse Intel and their sloppy thermal paste jobs    

 

Depending on your motherboard the H100i can have an issue with a lack of mounting pressure, which may be the problem you have:

-https://www.youtube.com/watch?v=dEBzLQ6qYnc-

[wolfsbane3083]

Depending on your motherboard the H100i can have an issue with a lack of mounting pressure, which may be the problem you have:

-https://www.youtube.com/watch?v=dEBzLQ6qYnc-

 

Already tried all these Makes no difference unfortunantely, I've just got a hot chip. Tried a Megahalems and 212 Evo as well and they couldn't keep it under 80c. 

[W-L]

Already tried all these Makes no difference unfortunantely, I've just got a hot chip. Tried a Megahalems and 212 Evo as well and they couldn't keep it under 80c. 

 

Hmm that's a bit unfortunate, I've seen 4790K thermal throttle on stock speeds with the stock cooler but that's a bit extreme. 

[Wu_david]

Hmm that's a bit unfortunate, I've seen 4790K thermal throttle on stock speeds with the stock cooler but that's a bit extreme. 

added a push pull config and im getting around 72 degrees, also im using arctic mx 4 thermal paste

[W-L]

added a push pull config and im getting around 72 degrees, also im using arctic mx 4 thermal paste

That's about right adding an extra fan for push pull five around a few degrees of extra cooling.