Jump to content

New build will not display on monitor after I powered it down

TakeruKatsumi
By TakeruKatsumi
in Troubleshooting
 Share
Go to solution Solved by spaiduhz,

Cable used? My previous monitor had a similar isue when i used a hdmi cable. Had to pull the cable out and plug it back in to turn it back on.

Ive since changed to a diffrent set using dport cables instead. Didnt give me that heartache.

Also, you want to see if turning off nvidia surround helps or na.

Posted

Ok so I finished my new build and started messing around and downloading some of my main programs I used then shut the computer off but now when I power it on I can see the bios boot menu and everything is fine until windows loads then my monitors will stay lit up but no image on any of them. I'm running the monitors here is a link to my build

http://pcpartpicker.com/user/TakeruKatsumi/saved/mgMNnQ

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

might not help but my current rig does this bullshit all the time! what i do, turn off monitor and turn on system wait till you think its probably booted to windows and then turn on the monitor, or sometimes i have to reset the bios.

PCPP http://pcpartpicker.com/p/Vg96f7 CPU: Intel i7 4790K MoBo: Gigabyte Z97X S.O.C Ram: G.Skill 2x 8gb GPU: 2x AMD R9 290x in CrossFire SoundCard: Creative Sound Blaster z Case: NZXT H440 RED/BLK Storage: 2x Intel 520s 120gb Raid 0 + 2tb Seagate 7200 PSU: EVGA 1000W G2 Fully Modular Display: Samsung UHD 4K 28'' KeyBoard: Corsair K65 RGB Mouse: Cyborg R.A.T 7 Sound: Logitech z506 OS: Windows 10 TP

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I had this problem earlier so I got mad and just went back into the bios and done a fresh install of windows and wiped everything clean and it started up fine then it started doing it again

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Ok just got your reply right after I posted a reply to my own post that fixed it just hope I don't have to keep doing that

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Ok just got your reply right after I posted a reply to my own post that fixed it just hope I don't have to keep doing that

yeah its really annoying, it might be you video cable(s) cause my PC started doing as soon as i brought a longer cable but anyway i really don't know what causes it 

PCPP http://pcpartpicker.com/p/Vg96f7 CPU: Intel i7 4790K MoBo: Gigabyte Z97X S.O.C Ram: G.Skill 2x 8gb GPU: 2x AMD R9 290x in CrossFire SoundCard: Creative Sound Blaster z Case: NZXT H440 RED/BLK Storage: 2x Intel 520s 120gb Raid 0 + 2tb Seagate 7200 PSU: EVGA 1000W G2 Fully Modular Display: Samsung UHD 4K 28'' KeyBoard: Corsair K65 RGB Mouse: Cyborg R.A.T 7 Sound: Logitech z506 OS: Windows 10 TP

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Ok yeah so shut down the computer to let a few updates finish and now the monitors once again will light up with no image even if I have them turned off for a good five to ten minutes after I boot up the system

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

Cable used? My previous monitor had a similar isue when i used a hdmi cable. Had to pull the cable out and plug it back in to turn it back on.

Ive since changed to a diffrent set using dport cables instead. Didnt give me that heartache.

Also, you want to see if turning off nvidia surround helps or na.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×