New rig, PC doesn't boot

[drkk]

Just build a new PC. Got everything sorted out. But once I turn on the power, front and back fans are spinning, gfx is running, dvd drive as well... for a good 5 sec before it power down. and the cycle is repeated. The only thing I notice that was not spinning was the stock CPU cooler fan. Although it did nudge abit but wasn't really spinning. Could someone tell me what's going on?

 

 

Spec:

 

Case: Bitfenix Prodigy

Chipset: Intel 4570

Motherboard: Gigabyte H87n-wifi

Ram: Corsair Vengeance 8GB

HDD: WD 1tb

SSD: Samsung 120 GB

PSU: Seasonic 520w

GFX: Gigabyte 660

[M-ursu]

Is EPS connected?

[helping]

Make sure you're plugging in the correct power pins to the CPU, don't get the PCI power pins confused with CPU power pins.

[drkk]

I'm sorry. I'm new to building a PC. Whats a EPS?

 

Power pins are the 24pins connecter right? there isn't any other pins that has the same features tho.

[Emperor_Piehead]

I'm sorry. I'm new to building a PC. Whats a EPS?

 

Power pins are the 24pins connecter right? there isn't any other pins that has the same features tho.

EPS is the 8 pin that you plug into the top left part of your motherboard.

[solomongrundy]

I'm sorry. I'm new to building a PC. Whats a EPS?

 

Power pins are the 24pins connecter right? there isn't any other pins that has the same features tho.

Seems like this board has a 4 pin connector about quarter of the way down in the middle.

 

Make sure it's plugged in.

[drkk]

EPS is the 8 pin that you plug into the top left part of your motherboard.

Does a mini ITX has that? I checked my user manual, didn't stated it has.

[Emperor_Piehead]

Does a mini ITX has that? I checked my user manual, didn't stated it has.

sorry didn't realize you had an itx system. It could also be a 4 pin.

[drkk]

Thanks guys. It's up and running. Haha. I bet this is the easier solved problem out there. Thanks a bunch. Might come back in the future for more noobish problems