Jump to content

new build... NO POST ...help?

Bl00dgod
By Bl00dgod
in New Builds and Planning
 Share
Posted

hi i've build my new rig and tried to power it on but dont get any POST...only the black screen ( while the display was turned on ;) )

i tried hdmi onboard and the hdmi / dvi from my gpu .. nothing

motherboard led show "green" lights and ram etc seems to be working

 

i touched the psu like every 20 seconds and my heater with my feet while working on cardboard ground to prevent static

http://pcpartpicker.com/p/rHjVpg

 

no post means that i got a DOA CPU? or could it be the board?

 

Spoiler

CPU i7 4790K 4,7Ghz Cooling:Corsair H100iGTX+Noctua NF-F12PWM GPU: EVGA 1080ti SC+ ACX2.0+ RAM:16GB DDR3 1866mhz Crucial Balistics Tactical Tracer Mobo:ASUS Z97-AR PSU:EVGA 750W G2 Supernova Case:Fractal Meshify C Storage:500GB Samsung 850 evo, 900GB Toshiba Game Storage SSD, 2TB Data HDD

i7 4790k Devils Canyon OC @4,6Ghz,Cooler Corsair h100i GTX, GPU EVGA 980Ti SC+ ACX 2.0+ @ stoc

http://linustechtips.com/main/topic/278610-display-technology-faqmythbuster/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try swapping ram, one stick, two stick... 

try removing the gpu. do you get to the bios ?

~New~  BoomBerryPi project !  ~New~


new build log : http://linustechtips.com/main/topic/533392-build-log-the-scrap-simulator-x/?p=7078757 (5 screen flight sim for 620$ CAD)LTT Web Challenge is back ! go here  :  http://linustechtips.com/main/topic/448184-ltt-web-challenge-3-v21/#entry601004

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

nope it just stays a black screen not able to enter bios

i try swapping ram now and remove the gpu

 

Spoiler

CPU i7 4790K 4,7Ghz Cooling:Corsair H100iGTX+Noctua NF-F12PWM GPU: EVGA 1080ti SC+ ACX2.0+ RAM:16GB DDR3 1866mhz Crucial Balistics Tactical Tracer Mobo:ASUS Z97-AR PSU:EVGA 750W G2 Supernova Case:Fractal Meshify C Storage:500GB Samsung 850 evo, 900GB Toshiba Game Storage SSD, 2TB Data HDD

i7 4790k Devils Canyon OC @4,6Ghz,Cooler Corsair h100i GTX, GPU EVGA 980Ti SC+ ACX 2.0+ @ stoc

http://linustechtips.com/main/topic/278610-display-technology-faqmythbuster/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I am personally not seeing any reason on why you aren't getting POST. Could be a DOA CPU like you said. If the card is working and the lights on the ram are showing, then i wouldn't think it would be the board.

Current Build: Core i7 4790k @ 4.6, Asus Maximus VII Hero, Corsair Vengeance Pro 2400mhz 8gb (2x4gb), GTX 980ti, NZXT Kraken X61, Fractal Define R5  EVGA Supernova B2 850w, Some 300gb hard drive.

 

http://pcpartpicker.com/p/W7CNrH

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hi i build my new pc yesterday

and dont get any POST...

i tried hdmi onboard and the hdmi / dvi from my gpu .. nothing

motherboard led show "green" lights and ram etc seems to be working

i touched the psu like every 20 seconds and my heater with my feet while working on cardboard ground to prevent static

http://pcpartpicker.com/p/rHjVpg

no post means that i got a DOA CPU? or could it be the board?

you'll need more than a 500gb ssd dude get a western digital caviar blue
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I am personally not seeing any reason on why you aren't getting POST. Could be a DOA CPU like you said. If the card is working and the lights on the ram are showing, then i wouldn't think it would be the board.

cpus dont DOA usually

bent mobo pins?

OFF TOPIC: I suggest every poll from now on to have "**CK EA" option instead of "Other"

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try reseating CPU cooler

CPU - i5 4690K @ 4.5Ghz l CPU Cooler - Nepton 240m l GPU - MSI GTX970 gaming 4g 2-way SLI l SLI Bridge - MSI Gaming 2-way L Pro l Mobo - MSI Z97-G45 Gaming l RAM - 2x8GB Vengeance Pro 2133mhz DDR3 l PSU - Corsair HX750i l SSD - 2x Samsung 840 Evo 250GB in raid 0 | HDD - WD Black 2TB | Case - NZXT H440 Red/Black l OS - Windows 10 l Mouse - Logitech G502 l MousePad - XTRFY NiP lightning l KeyBoard - Corsair Vengeance K70 RGB (Red) | Headset - Asus ROG Spitfire | Monitor - Asus PG279Q - VG248QE l PCPP - http://pcpartpicker.com/p/sxTpsY | Please don't buy CX PSU for a high end PC

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

try reseating CPU cooler

^ This can actually be the problem in some cases. Or possibly try using a different fan header for your CPU if it reaches. Your computer might not post because it doesn't want to break your CPU.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

You have all the cables plugged into the GPU/MB? 24 pin for MB, 8 pin for CPU etc? 

CPU: i7 8700k   Motherboard: Asus Maximus Hero  RAM: 16GB @ 3600Mhz  GPU: MSI 980Ti 6G  Case: Fractal Design R5 (4 Intakes/3Exhausts)  Storage: Crucial BX100 SSD, Samsung 850 & Seagate 2TB HDD  PSU: Seasonic M12II Evo '850W'  CPU Cooling: Corsair H110i GT 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

cpus dont DOA usually

bent mobo pins?

i wouldn't think that the card or the ram would even run unless the cpu was working?

Current Build: Core i7 4790k @ 4.6, Asus Maximus VII Hero, Corsair Vengeance Pro 2400mhz 8gb (2x4gb), GTX 980ti, NZXT Kraken X61, Fractal Define R5  EVGA Supernova B2 850w, Some 300gb hard drive.

 

http://pcpartpicker.com/p/W7CNrH

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Bl00dgod, check this out http://linustechtips.com/main/topic/42440-readme-how-to-respond-to-a-no-post-or-no-power-up-situation/

Current Build: Core i7 4790k @ 4.6, Asus Maximus VII Hero, Corsair Vengeance Pro 2400mhz 8gb (2x4gb), GTX 980ti, NZXT Kraken X61, Fractal Define R5  EVGA Supernova B2 850w, Some 300gb hard drive.

 

http://pcpartpicker.com/p/W7CNrH

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

its not the first pc i build so i know how to plugg everything in.... i double checked and it was fine... already had some of the cables "hidden/managed" 

 

so now i took everything out...  worked

2 ram "red" sticks plugged          -> worked

4 (2 blue/orange led 2 red/green led) ram sticks plugged  -> failed      -> tried to swap 

2 ram "blue" sticks plugged -> failed          --> 2 ram "blue" sticks "dead"

 

gpu still not plugged in

 

BIOS looks fancy... cpu running at 30°C so its not DOA ... or it wouldnt be "warm"

RAM running at 1333mhz with Voltage 1.517 ( standard setting )  didnt change anything....            but my ram should be 1866mhz

getting post message   cpu fan error now                                -> h100i gtx plug is corectly plugged into cpu fan  ( pins are all ok )        WHY? the error

 

Spoiler

CPU i7 4790K 4,7Ghz Cooling:Corsair H100iGTX+Noctua NF-F12PWM GPU: EVGA 1080ti SC+ ACX2.0+ RAM:16GB DDR3 1866mhz Crucial Balistics Tactical Tracer Mobo:ASUS Z97-AR PSU:EVGA 750W G2 Supernova Case:Fractal Meshify C Storage:500GB Samsung 850 evo, 900GB Toshiba Game Storage SSD, 2TB Data HDD

i7 4790k Devils Canyon OC @4,6Ghz,Cooler Corsair h100i GTX, GPU EVGA 980Ti SC+ ACX 2.0+ @ stoc

http://linustechtips.com/main/topic/278610-display-technology-faqmythbuster/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

you'll need more than a 500gb ssd dude get a western digital caviar blue

i got a 1tb hdd and a 2tb hdd just waiting to be plugged into the running system ;)

 

Spoiler

CPU i7 4790K 4,7Ghz Cooling:Corsair H100iGTX+Noctua NF-F12PWM GPU: EVGA 1080ti SC+ ACX2.0+ RAM:16GB DDR3 1866mhz Crucial Balistics Tactical Tracer Mobo:ASUS Z97-AR PSU:EVGA 750W G2 Supernova Case:Fractal Meshify C Storage:500GB Samsung 850 evo, 900GB Toshiba Game Storage SSD, 2TB Data HDD

i7 4790k Devils Canyon OC @4,6Ghz,Cooler Corsair h100i GTX, GPU EVGA 980Ti SC+ ACX 2.0+ @ stoc

http://linustechtips.com/main/topic/278610-display-technology-faqmythbuster/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

disabled cpu fan monitoring  -> no more cpu fan error

running stable without problem :D wohooo

thanks for the help guys

 

Spoiler

CPU i7 4790K 4,7Ghz Cooling:Corsair H100iGTX+Noctua NF-F12PWM GPU: EVGA 1080ti SC+ ACX2.0+ RAM:16GB DDR3 1866mhz Crucial Balistics Tactical Tracer Mobo:ASUS Z97-AR PSU:EVGA 750W G2 Supernova Case:Fractal Meshify C Storage:500GB Samsung 850 evo, 900GB Toshiba Game Storage SSD, 2TB Data HDD

i7 4790k Devils Canyon OC @4,6Ghz,Cooler Corsair h100i GTX, GPU EVGA 980Ti SC+ ACX 2.0+ @ stoc

http://linustechtips.com/main/topic/278610-display-technology-faqmythbuster/

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing New Builds and Planning

×