Jump to content

Turbo not working?

Hirad123
 Share
Posted

Hey forum. So i finally finished my loop completely and the temps are nice so i went to OC my CPU on my maximus V gene and i'm using offset voltage. I set the turbo frequency to 43 and sure enough when under stress the CPU would turbo up to 4.3 and the voltage would adjust accordingly. However, I went to raise the frequency since i already know my chip can get higher than 4.3 but when i set the turbo frequency to 4.4 it still only turbos to 4.3. I've gone back into the UEFI like 6 times and made sure it was set to 44 and it still just keeps turboing up to 4.3 why is that?

                                                                                                                                                                | 5820k+EK supremacy nickel+acetal white 4.5Ghz | X99 Deluxe | Enthoo Luxe | 2x gtx780+komod NV full cover block | Corsair AX1200i | WD blue 500gb |

                                                                                                                                                                                 | Kingston V300 120gb | Samsung 840 Evo 500gb| Bitspower D5 vario+Res combo | primochill advanced LRT tubing (Solid White) |

                                                                                                                                                       | Alphacool Nexxos MONSTA dual 120mm Black Ice nemesis GTX360 triple 120mm | Noctua NF-F12 X4 | Bitspower true silver 1/2ID 3/4 OD compressions (various angles) |

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/
Share on other sites
Link to post
Share on other sites
Posted

Some Asus boards don't like it when you overclock and have the turbo enabled. The R4E disables Turbo Boost when you overclock to more than 4,4 GHz. Try and disable Turbo boost and see what happens.

 

Edit: I meant you should try and dial in you overclock as a straight overclock insted of a Turbo Boost overclock

Nova doctrina terribilis sit perdere

Audio format guides: Vinyl records | Cassette tapes

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-587985
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Some Asus boards don't like it when you overclock and have the turbo enabled. The R4E disables Turbo Boost when you overclock to more than 4,4 GHz. Try and disable Turbo boost and see what happens.

 

Edit: I meant you should try and dial in you overclock as a straight overclock insted of a Turbo Boost overclock

Still the same issue. Any other ideas?

                                                                                                                                                                | 5820k+EK supremacy nickel+acetal white 4.5Ghz | X99 Deluxe | Enthoo Luxe | 2x gtx780+komod NV full cover block | Corsair AX1200i | WD blue 500gb |

                                                                                                                                                                                 | Kingston V300 120gb | Samsung 840 Evo 500gb| Bitspower D5 vario+Res combo | primochill advanced LRT tubing (Solid White) |

                                                                                                                                                       | Alphacool Nexxos MONSTA dual 120mm Black Ice nemesis GTX360 triple 120mm | Noctua NF-F12 X4 | Bitspower true silver 1/2ID 3/4 OD compressions (various angles) |

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588020
Share on other sites
Link to post
Share on other sites
Posted

Still the same issue. Any other ideas?

Hmm, Did you set the AI overclock Tuner to manuel? Also try and disable the offset voltage and just dial in a voltage. Maybe set the LLC to a higher value 

Nova doctrina terribilis sit perdere

Audio format guides: Vinyl records | Cassette tapes

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588040
Share on other sites
Link to post
Share on other sites
Posted

Still the same issue. Any other ideas?

Turn off turbo, and just OC to your desired freq.

| CPU: INTEL i5 6600k @ 4.6Ghz @ 1.328v | Motherboard: ASUS Z170-AR | Ram: G.SKILL 2x8GB 2400Mhz | CPU Cooler : Corsair H100i V2

| GPU: GIGABYTE GTX980Ti G1 GAMING | SSD: SAMSUNG 840 EVO 250GB  | Storage: WD 1TB GREEN | OS: Windows 10 Pro 64bit | PSU: FSP 650W AURUM S |

<<<<< BLK-Phant0m >>>>>

 

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588042
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Hmm, Did you set the AI overclock Tuner to manuel? Also try and disable the offset voltage and just dial in a voltage. Maybe set the LLC to a higher value

I just cleared the CMOS and now it works. After clearing the CMOS all i did eas enable C1E set voltage to offset and turbo to 44 and now it turbos to 44 wtf

                                                                                                                                                                | 5820k+EK supremacy nickel+acetal white 4.5Ghz | X99 Deluxe | Enthoo Luxe | 2x gtx780+komod NV full cover block | Corsair AX1200i | WD blue 500gb |

                                                                                                                                                                                 | Kingston V300 120gb | Samsung 840 Evo 500gb| Bitspower D5 vario+Res combo | primochill advanced LRT tubing (Solid White) |

                                                                                                                                                       | Alphacool Nexxos MONSTA dual 120mm Black Ice nemesis GTX360 triple 120mm | Noctua NF-F12 X4 | Bitspower true silver 1/2ID 3/4 OD compressions (various angles) |

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588043
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Turn off turbo, and just OC to your desired freq.

It still didn't work when i did that.

                                                                                                                                                                | 5820k+EK supremacy nickel+acetal white 4.5Ghz | X99 Deluxe | Enthoo Luxe | 2x gtx780+komod NV full cover block | Corsair AX1200i | WD blue 500gb |

                                                                                                                                                                                 | Kingston V300 120gb | Samsung 840 Evo 500gb| Bitspower D5 vario+Res combo | primochill advanced LRT tubing (Solid White) |

                                                                                                                                                       | Alphacool Nexxos MONSTA dual 120mm Black Ice nemesis GTX360 triple 120mm | Noctua NF-F12 X4 | Bitspower true silver 1/2ID 3/4 OD compressions (various angles) |

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588048
Share on other sites
Link to post
Share on other sites
Posted

It still didn't work when i did that.

Ok, try to Clear CMOS, then try to OC again. If it didnt work try to flash latest BIOS version.

| CPU: INTEL i5 6600k @ 4.6Ghz @ 1.328v | Motherboard: ASUS Z170-AR | Ram: G.SKILL 2x8GB 2400Mhz | CPU Cooler : Corsair H100i V2

| GPU: GIGABYTE GTX980Ti G1 GAMING | SSD: SAMSUNG 840 EVO 250GB  | Storage: WD 1TB GREEN | OS: Windows 10 Pro 64bit | PSU: FSP 650W AURUM S |

<<<<< BLK-Phant0m >>>>>

 

Link to comment
https://linustechtips.com/topic/44799-turbo-not-working/#findComment-588058
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×