Greetings

[yerfdog79]

Hi.  New to these forums and thought I'd share my OC with you.  I have my core i7-950 at 4.2ghz.  shoudl be stable, would've crashes by now.  It set to lower voltage than i had it before so the temps are a tad lower.  Anyway, love LTT on you tube.  Very informative and entertaining.  I suck at forums so if i'm in the wrong place let me know.  I'll try to attach a acreenshot so you can see what i have going on.  I plan on continuing to run the test since it' only been goin about 30 min.  I'll probably do a burn test later on.  Whoever ganders at my post, thank you for taking the time.  If anyone wants anymore info from me, just let me know.  oh, my setup, short of the GPU is 4.5yrs old.  Thnaks again.

 

oh. thas was the old post i was gonn put up before i accidently closed it

 

[robert1339]

I would stress test for 24 hours plus to ensure that it is stable but even then it could crash because of instability. We'll never be SURE 'sure'

1.36 is a pretty high voltage imo

[ANewFace]

1.36V? If you are not running a high end custom loop scale that back

[Textosterone]

Greetings fellow Marylander

[yerfdog79]

oooh, you guys are going to hate me, i had around 1.42 volts stable before i accidentally messed up a setting in the bios.  I can't get it into the os really below this voltage.  If any suggestions on any other tinkering to maintain this speed i'm all eyes.  Respect the 410(and 301 still in places)

[Textosterone]

oooh, you guys are going to hate me, i had around 1.42 volts stable before i accidentally messed up a setting in the bios.  I can't get it into the os really below this voltage.  If any suggestions on any other tinkering to maintain this speed i'm all eyes.  Respect the 410(and 301 still in places)

ayyy and the 443 m8 also 667 (started in 2013)