Enthoo Luxe Fan Setup

DrakeFive55 · August 1, 2015

I have an enthoo luxe and I'm wondering how you have your fans setup

I put the 2 140 MM fans that came with the case on the front and totally removed the 200MM. I then put a 140MM corsair AF as exhaust and then 3 120MM fans that I already had on top (2x Corsair AF and 1 x silverstone)

Should I have put the 200MM on top instead of 2 x 120MM

Or would 2 X 120MM fans be better than 1 x 200MM

DarkSmith2 · August 1, 2015

Put the 200mm back to front.

Put 3 140mm on top

if exhaust fan is needed (depends on your CPU cooler) stick a 120mm on the back.

There is nearly no benefit from running two 140mm fans in the front vs 1x 200mm. It doesnt hugely change your Airflow.

The only reason would be that you have to get a higher surface intake to cool HDDs.

Dont forget to order these anti vibration rubber stickers:

You can get them if you contact Phanteks Support, i needed them because without, the fans produce weird vibration noise.

Sadly they dont came with the case from begin with.

DrakeFive55 · August 1, 2015

I heard a lot of people say that the 200MM on the front wasn't very good though..... So based on what you've said I should put the 200MM back on the front, put 1 X 120MM on the back and 3 X 140MM on the top

DrakeFive55 · August 1, 2015

Put the 200mm back to front.

Put 3 140mm on top

if exhaust fan is needed (depends on your CPU cooler) stick a 120mm on the back.

There is nearly no benefit from running two 140mm fans in the front vs 1x 200mm. It doesnt hugely change your Airflow.

The only reason would be that you have to get a higher surface intake to cool HDDs.

Dont forget to order these anti vibration rubber stickers:

You can get them if you contact Phanteks Support, i needed them because without, the fans produce weird vibration noise.

Sadly they dont came with the case from begin with.

I heard a lot of people say that the 200MM on the front wasn't very good though..... So based on what you've said I should put the 200MM back on the front, put 1 X 120MM on the back and 3 X 140MM on the top