Jump to content

CaseLabs Nova X2M

soundreaper
By soundreaper
in Power Supplies
 Share
Posted

should be possible i would think but it would be a bit janky and the psu will have to be moved to another place. It might not look that attractive

cpu: intel i5 4670k @ 4.5ghz Ram: G skill ares 2x4gb 2166mhz cl10 Gpu: GTX 680 liquid cooled cpu cooler: Raijintek ereboss Mobo: gigabyte z87x ud5h psu: cm gx650 bronze Case: Zalman Z9 plus


Listen if you care.

Cpu: intel i7 4770k @ 4.2ghz Ram: G skill  ripjaws 2x4gb Gpu: nvidia gtx 970 cpu cooler: akasa venom voodoo Mobo: G1.Sniper Z6 Psu: XFX proseries 650w Case: Zalman H1

Link to comment
https://linustechtips.com/topic/408267-caselabs-nova-x2m/#findComment-5500109
Share on other sites
Link to post
Share on other sites
Posted
  • Author

should be possible i would think but it would be a bit janky and the psu will have to be moved to another place. It might not look that attractive

 

Are you sure about moving the PSU? Based on the pictures, if I use the motherboard plate that is currently there and screw in the mATX board (of course I'll have to drill more holes), I don't think the PSU would create any problems.

Link to comment
https://linustechtips.com/topic/408267-caselabs-nova-x2m/#findComment-5500262
Share on other sites
Link to post
Share on other sites
Posted

Are you sure about moving the PSU? Based on the pictures, if I use the motherboard plate that is currently there and screw in the mATX board (of course I'll have to drill more holes), I don't think the PSU would create any problems.

assuming you arent going to change the IO shield placement the bottom of the board will hit the psu area. Im 70% sure there will be a problem in that area.

cpu: intel i5 4670k @ 4.5ghz Ram: G skill ares 2x4gb 2166mhz cl10 Gpu: GTX 680 liquid cooled cpu cooler: Raijintek ereboss Mobo: gigabyte z87x ud5h psu: cm gx650 bronze Case: Zalman Z9 plus


Listen if you care.

Cpu: intel i7 4770k @ 4.2ghz Ram: G skill  ripjaws 2x4gb Gpu: nvidia gtx 970 cpu cooler: akasa venom voodoo Mobo: G1.Sniper Z6 Psu: XFX proseries 650w Case: Zalman H1

Link to comment
https://linustechtips.com/topic/408267-caselabs-nova-x2m/#findComment-5500392
Share on other sites
Link to post
Share on other sites
Posted
  • Author

assuming you arent going to change the IO shield placement the bottom of the board will hit the psu area. Im 70% sure there will be a problem in that area.

 

I see. Hmm...maybe I can mod the PSU to be shorter xD. I will look at the diagrams again and see what I can do.

Link to comment
https://linustechtips.com/topic/408267-caselabs-nova-x2m/#findComment-5500724
Share on other sites
Link to post
Share on other sites
Posted

I see. Hmm...maybe I can mod the PSU to be shorter xD. I will look at the diagrams again and see what I can do.

maybe an sfx psu could be a better idea and at a push maybe tfx.

cpu: intel i5 4670k @ 4.5ghz Ram: G skill ares 2x4gb 2166mhz cl10 Gpu: GTX 680 liquid cooled cpu cooler: Raijintek ereboss Mobo: gigabyte z87x ud5h psu: cm gx650 bronze Case: Zalman Z9 plus


Listen if you care.

Cpu: intel i7 4770k @ 4.2ghz Ram: G skill  ripjaws 2x4gb Gpu: nvidia gtx 970 cpu cooler: akasa venom voodoo Mobo: G1.Sniper Z6 Psu: XFX proseries 650w Case: Zalman H1

Link to comment
https://linustechtips.com/topic/408267-caselabs-nova-x2m/#findComment-5503329
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×