Jump to content

I need help with my gpu

paulenworb
By paulenworb
in Troubleshooting
 Share
Posted

specs: case : corsair spec 01 

           motherboard : z97-c

           GPU : sapphire r9 270x

           ram : HyperX FURY Series 8GB

           PSU : Corsair Builder Series CX 500 Watt

           CPU : Intel Pentium G3258 CPU
           HDD : WD 1TB 3.5 inch Internal Hard Drive
          moniter : BenQ DL2215 LED
 
when i power up my computer without  my GPU it is fine.
 
But when i plug in my GPU the moniter gets no signal
Link to comment
https://linustechtips.com/topic/397374-i-need-help-with-my-gpu/
Share on other sites
Link to post
Share on other sites
Posted

do you use video outputs of the graphics card?

Location: Kaunas, Lithuania, Europe, Earth, Solar System, Local Interstellar Cloud, Local Bubble, Gould Belt, Orion Arm, Milky Way, Milky Way subgroup, Local Group, Virgo Supercluster, Laniakea, Pisces–Cetus Supercluster Complex, Observable universe, Universe.

Spoiler

12700, B660M Mortar DDR4, 32GB 3200C16 Viper Steel, 2TB SN570, EVGA Supernova G6 850W, be quiet! 500FX, EVGA 3070Ti FTW3 Ultra.

 

Link to comment
https://linustechtips.com/topic/397374-i-need-help-with-my-gpu/#findComment-5357245
Share on other sites
Link to post
Share on other sites
Posted

 

specs: case : corsair spec 01 

           motherboard : z97-c

           GPU : sapphire r9 270x

           ram : HyperX FURY Series 8GB

           PSU : Corsair Builder Series CX 500 Watt

           CPU : Intel Pentium G3258 CPU
           HDD : WD 1TB 3.5 inch Internal Hard Drive
          moniter : BenQ DL2215 LED
 
when i power up my computer without  my GPU it is fine.
 
But when i plug in my GPU the moniter gets no signal

 

might sound stupid, but did you connect properly?

which port did you connect to on the gpu? Hdmi? dvi? 

Link to comment
https://linustechtips.com/topic/397374-i-need-help-with-my-gpu/#findComment-5357247
Share on other sites
Link to post
Share on other sites
Posted

 

specs: case : corsair spec 01 

           motherboard : z97-c

           GPU : sapphire r9 270x

           ram : HyperX FURY Series 8GB

           PSU : Corsair Builder Series CX 500 Watt

           CPU : Intel Pentium G3258 CPU
           HDD : WD 1TB 3.5 inch Internal Hard Drive
          moniter : BenQ DL2215 LED
 
when i power up my computer without  my GPU it is fine.
 
But when i plug in my GPU the moniter gets no signal

 

Before you plug in your GPU could you go into the BIOS and set the first display device to PCIe please? That sometimes causes issues where the BIOS/UEFI doesn't detect the GPU properly and tries to boot using the onboard graphics instead.

CPU: Core i5 2500K @ 4.5GHz | MB: Gigabyte Z68XP-UD3P | RAM: 16GB Kingston HyperX @ 1866MHz | GPU: XFX DD R9 390 | Case: Fractal Design Define S | Storage: 500GB Samsung 850 EVO + WD Caviar Blue 500GB | PSU: Corsair RM650x | Soundcard: Creative Soundblaster X-Fi Titanium
Click here to help feed our lasses Pokemon

Link to comment
https://linustechtips.com/topic/397374-i-need-help-with-my-gpu/#findComment-5357286
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×