H110 into a 230T

[Cheewin]

Will a H110 fit in a 230T? The Corsair website compatibility thing says it will, but I've seen some forums describing how you must mount the fans on top of the case to actually get the darn thing working.

 

-Thanks

[ForsakenLive]

Most likely not going to fit on the top, unless you have a really low profile mobo and ram, which is most likely not the case.

I bet you could clear the front from HDD cages and use the room to mount the AiO vertically. using a 5.25" to 3.5" drive adapter for storage.

[Cream pie filled car]

Most likely not going to fit on the top, unless you have a really low profile mobo and ram, which is most likely not the case.

I bet you could clear the front from HDD cages and use the room to mount the AiO vertically. using a 5.25" to 3.5" drive adapter for storage.

The front fans on the 230t are only for 120mm fans and the 2 places to put fans in the front are on different levels. The bottom fan is mounted further into the case than the top fan.

[Cream pie filled car]

To mount the h110 on top, you would have to install the fans outside the case and the radiator inside due to clearance issues. Like what you stated

[ForsakenLive]

The front fans on the 230t are only for 120mm fans and the 2 places to put fans in the front are on different levels. The bottom fan is mounted further into the case than the top fan.

just checked some pics, you are right.