Jump to content

I just build my new pc for the first time. and after installing windows the pc suddenly shut down (keep in mind it was working fine for a couple of hours) and would restart every 2 seconds spinning the fans and showing a black screen. Everything in the build is brand new and I already tried to disconnect everything except the power. when I tested on the motherboard box it worked fine.

 

 

build specs:

intel-4690k

gigabyte GA-Z97X-SLI

Samsung ssd 850 evo 250gb

cooler master g550m (powersupply)

cooler master nepton 240m(water cooler)

and a kit of 8 gig crucial ballistix ram

it's all build in the h440 case from nzxt can someone help me?

Link to comment
https://linustechtips.com/topic/371668-pc-restarting-every-2-seconds/
Share on other sites

Link to post
Share on other sites

thx for the quote tip I just cleared the cmos with the clear cmos pins and tried to remove the battery it did respond to it but it's still stuck in a loop.

Maybe remove power and check that everything is plugged in correctly?

 

 

Link to post
Share on other sites

Maybe remove power and check that everything is plugged in correctly?

I already did the 24pin is on it's place the 8pin for the cpu is also I don't have a gpu yet and all the other cables are plugged in like they are supposed to. the pc started doing this after 3 windows crashes.

Link to post
Share on other sites

For the OP, in future, if you realise that you've posted in the wrong place, please just report the original thread and we'll move it for you.

For everyone who pointed it out, in future please just report it and move on. Backseat moderating is against the Code of Conduct.

HTTP/2 203

Link to post
Share on other sites

For the OP, in future, if you realise that you've posted in the wrong place, please just report the original thread and we'll move it for you.

For everyone who pointed it out, in future please just report it and move on. Backseat moderating is against the Code of Conduct.

thank you for the tip, it wont happen again!

Link to post
Share on other sites

I already did the 24pin is on it's place the 8pin for the cpu is also I don't have a gpu yet and all the other cables are plugged in like they are supposed to. the pc started doing this after 3 windows crashes.

Try disassembling it completely then reassembling.

WITH CMOS BATTERY OUT

 

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×