h100i screws

[Swegly]

When I first bought my h100i  a year ago, the screws did not fit to mount the radiator to the case because they were to wide or did not have propper threading. I have used some random screws which work but dont look good. I was wondering if I went to a local tech store, would I be able to buy just the 6 short screws and washers required to mount the radiator to the case propperly.

 

Thanks

[Kicksomeass]

I think that it is a problem only for u 

the h100i is working properly at my side the mounting was also fine

 

Good Luck tho

[Swegly]

I think that it is a problem only for u 

the h100i is working properly at my side the mounting was also fine

 

Good Luck tho

So are you going to help with my solution? My h100i works fine, I just want to switch screws

[PirateCoffee]

Shouldn't be a need to change screws, if the device works fine it's fine.

 

[X_Rated_Box]

you should have rma'd ut instantly:D

[Swegly]

Shouldn't be a need to change screws, if the device works fine it's fine.

Read what I wrote in the post. I did not use the screws that came with the h100i, they didnt work. I used ghetto looking screws to mount it in and the aesthetics are important to me. I want the screws that usually come with the h100i because those look good 

 

you should have rma'd ut instantly:D

You shouldn't have posted here because your wasting my time?

Maybe you should learn how to read. The h100i isnt the problem, I dont have the screws for it.

[Kicksomeass]

Maybe you can paint your old screws?

[W-L]

When I first bought my h100i  a year ago, the screws did not fit to mount the radiator to the case because they were to wide or did not have propper threading. I have used some random screws which work but dont look good. I was wondering if I went to a local tech store, would I be able to buy just the 6 short screws and washers required to mount the radiator to the case propperly.

 

Thanks

 

If they have some extra screws from pre-built systems maybe but it depends how helpful they are, if I remember the H100i uses 6-32 thread screws so as long as you can source the correct length screws around 30mm or 1.25" screws to mount through the case, fan, then the rad.