Jump to content

Swiftech H220 expanding

PCBudgetSolutions
 Share
Posted

So I am hearing a TON of flack on the Eisberg for being loud.  The H220, I'd like to add 1 more radiator to it, replace the tubing. replace the barbs with compression with 3/8 ID 5/8 OD and add a 140x140x60MM read radiator.  Does the H220 support standard fittings?

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Does the H220 support standard fittings?

No, that's the sole reason its such a bad thing to expand. It simply has barbs.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No, that's the sole reason its such a bad thing to expand. It simply has barbs.

Really not looking to drop 500 on water cooling, it's not worth it, but AIO systems just aren't much better than an evo 212. The Eisberg would work perfectly but people here say the pump is noisey. Ideally I'd like to spend less than 250 total on a system.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Really not looking to drop 500 on water cooling, it's not worth it, but AIO systems just aren't much better than an evo 212. The Eisberg would work perfectly but people here say the pump is noisey. Ideally I'd like to spend less than 250 total on a system.

If you don't mind waiting do some lurking on eBay. Watercooling equipment doesn't really get used. I bought my first loop for £120 all in using eBay.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

If you don't mind waiting do some lurking on eBay. Watercooling equipment doesn't really get used. I bought my first loop for £120 all in using eBay.

What's your opinion on the swiftech apogee pump/block?

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

What's your opinion on the swiftech apogee pump/block?

My personal opinion is that a res-pump combo is a much better option. Because of the layout of a PC case having the reservoir above the CPU block is quite challenging.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

My personal opinion is that a res-pump combo is a much better option. Because of the layout of a PC case having the reservoir above the CPU block is quite challenging.

Yes, but the only one I see is the XSPC one that leaks like no tomorrow.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yes, but the only one I see is the XSPC one that leaks like no tomorrow.

XSPC also make a clear acrylic version of the reservoir which is perfectly fine.

 

There are also a few (non-bay) options if you look around.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

XSPC also make a clear acrylic version of the reservoir which is perfectly fine.

 

There are also a few (non-bay) options if you look around.

Ya but a decent pump is 100 bucks.  Add in my 100 dollars of radiator I am over budget already.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

XSPC also make a clear acrylic version of the reservoir which is perfectly fine.

 

There are also a few (non-bay) options if you look around.

How does this attach exactly? 

 

http://www.frozencpu.com/products/8336/ex-res-144/Swiftech_MCRES_Micro_Rev_2_Small_Form_Factor_High-Flow_Reservoir_12_ID_and_38_ID.html?tl=g30c97s165#blank

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

That is a stand alone res.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If you want cheap custom loop buy this:http://www.aquatuning.fi/product_info.php/info/p13669_Alphacool-NexXxoS-Cool-Answer-240-LT-ST---kit.html

It is easy to expand.

Error 709: Walrus on the road!

My build log: http://linustechtips.com/main/topic/131216-the-small-white-p-node-304-build http://linustechtips.com/main/topic/190057-build-the-large-p/

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

No longer sold in the US.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

They have the 360MM version, but it has clear tubing and I need a 45* fitting which puts it way over budget.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Then watch what parts that include and buy them seperatly. :)

Costs about 100 bucks more separate.

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Really not looking to drop 500 on water cooling, it's not worth it, but AIO systems just aren't much better than an evo 212. The Eisberg would work perfectly but people here say the pump is noisey. Ideally I'd like to spend less than 250 total on a system.

 

 

It's not really just a matter of performance, I think tons of people do it because it looks extremely cool as well. That's one of the reasons I'm going to do it, that and I wanna push my 3930k to 5+ ghz :D

Stuff:  i7 7700k @ (dat nibba succ) | ASRock Z170M OC Formula | G.Skill TridentZ 3600 c16 | EKWB 1080 @ 2100 mhz  |  Acer X34 Predator | R4 | EVGA 1000 P2 | 1080mm Radiator Custom Loop | HD800 + Audio-GD NFB-11 | 850 Evo 1TB | 840 Pro 256GB | 3TB WD Blue | 2TB Barracuda

Hwbot: http://hwbot.org/user/lays/ 

FireStrike 980 ti @ 1800 Mhz http://hwbot.org/submission/3183338 http://www.3dmark.com/3dm/11574089

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

What about this pump/res? http://www.frozencpu.com/products/14981/ex-pmp-182/Alphacool_DC-LT_Ceramic_12V_DC_Pump_Plexi_Top_Reservoir_-_Installed.html?tl=g30c107s152#blank

Specs: Core I7-2600K @ 4.5GHz @ 1.35V, 4x4GB Corsair Vengeance Black 1600MHz CL9, Cooler Master Evo 212, MSI Z77 Mpower Motherboard, Sapphire Radeon HD 7950 Vapor-X @ 1000/1400, Cooler Master HAF 932 Blue Edition w/ 3 Cougar Hydraulic Bearing 120MM fans (2 up top 1 in the bottom) replaced side panel with a window, and rear fan with a Cougar Hydraulic Bearing 140MM, Cooler Master GX 650 80+ Bronze PSU, Samsung DVD-RW, Samsung 840 Pro 128GB SSD, Seagate 750GB SATA III 7200RPM

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I would only ever recommend Laing pumps.

Feel free to PM for any water-cooling questions. Check out my profile for more ways to contact me.

 

Add me to your circles on Google+ here or you can follow me on twitter @deadfire19.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×